VITEK VT-1845 R/B - Инструкция по эксплуатации - Страница 8

Пылесос VITEK VT-1845 R/B - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 40
Загружаем инструкцию
background image

8

 ENGLISH

Clean the filters no less then tree-four times a 
year or often (in case of strong blocking).
•  Switch off the cleaner and unplug it from the 

wall outlet, detach the container (7) and re-
move the dust and trash out of it.

•  Take the filters (13, 14) out.
•  Clean dust and trash from the preliminary mi-

cro porous filter (13) and from the main filter 
(14). (Pic. 12)

•  You can clean the filters (13, 14) with the warm 

flowing water. Do not use the dishwasher ma-
chine for cleaning the filters (13, 14).

•  Dry the filters (13, 14) carefully. Do not use 

the hair drier for drying the filters. (Pic. 13)

4. Removing the output 

НЕРА

 filter (18) 

(Pic. 14)

•  Open the cap (19) by pressing on the latch.
•  Take out the output HEPA filter (18). Wash it 

under the flowing warm water if required. Dry 
the filter carefully before to install it back at 
the former place.

•  Install the output filter (18) at its former place 

and close the cap (19).

Vacuum cleaner housing

•  W ipe the vacuum cleaner housing with damp 

cloth. 

•  Do not allow any liquids dropping inside the 

vacuum cleaner. 

•  Do not use any dissolvent or abrasive deter-

gents for cleaning the vacuum cleaner hous-
ing. 

Automatic switching off function

The vacuum cleaner is supplied with the special 
automatic switching off function in case of the 
electric motor overheating.

•  

If the electric motor is going to become over-
heated, the automatic fuse snaps into action, 
and the vacuum cleaner is switched off. 

•  In this case unplug the power cord from the 

wall outlet immediately.

•  Examine whenever there is an object block-

ing the flexible hose and telescopic extension 
tube opening. Remove the clog if any.

•  Leave the vacuum cleaner for 20-30 minutes 

for cooling down before to switch it on again.

•  

Connect the power cord to the wall outlet. If 
the cleaner is not switched on, may be there 
is a damage. 

  In this case apply to the authorized service 

center for repair.

TECHNICAL SPECIFICATIONS

Power supply: 220 V ~ 50 Hz
Consumption power: 1800 W
Suction power: 400 W
Dust collecting container capacity: 2,5 L
Negative ions output: >=2x10

6

 

pcs/cm

3

 

Noise level: 86 dB

Specifications subject to change without prior 
notice.

Service life of  appliance -  5 years

GUARANTEE

 

Details regarding guarantee conditions can be 
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt 
must be produced when making any claim 
under the terms of this guarantee.

This product conforms to the EMC-
Requirements as laid down by the 
Council Directiv e 89/336/EEC 
and to the Law Voltage Regulation 
(73/23 EEC)

1845.indd   8

1845.indd   8

14.04.2010   9:29:45

14.04.2010   9:29:45

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-1845 R/B?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"