VITEK VT-1839 R/B/BK - Инструкция по эксплуатации - Страница 5

• Before connecting the hose, unplug 

the unit.

• Always switch off the unit, using first 

the ON/OFF button and then un-
plug. 

• Be especially careful while cleaning 

storey landings.

• Do not use the vacuum cleaner to 

pick up inflammable liquids such as 
benzene (gasoline, solvents) or in 
places where flammable liquids are 
stored.

• Do not use the vacuum cleaner to 

pick up water or other liquids, burn-
ing and smoking cigarettes, match-
es, smoldering ash,  fine dust, for 
example from plaster, concrete, flour 
or cinders.

  It can lead to serious damages of the 

motor, and keep in mind that these 
cases are not under warranty.

• Do not use the vacuum cleaner if 
-  Fabric or paper dust bag 
-  inlet and outlet HEPA-filter are not in-

stalled;

KEEP THIS MANUAL IN AN 
AVAILABLE PLACE

PRECAUTIONS

If during vacuum-cleaning the suction 
force sharply decreased, switch off 
the vacuum cleaner immediately and 
check the extension pipe and flexible 
hose with respect to blockage. Switch 
off the vacuum cleaner and unplug it, 
remove the blockage and then contin-
ue the cleaning.  
• Do not use the vacuum cleaner near 

heated sources, near an ash tray and 
in places where flammable liquids 
are stored. 

•  Insert the plug in the socket only with 

dry hands. 

• Before cleaning take away all sharp 

objects from the floor in order not to 
damage the dust bag. 

• While extracting the plug from the 

socket hold it by the plug, do not pull 
the power cable.

Assembly

Fully unpack the vacuum cleaner and 
check whether there are damages or 
not. Before switching on make sure 
that the voltage of the vacuum cleaner 
corresponds to the net voltage. Always 
unplug the vacuum cleaner and pull 
the plug out of the socket while chang-
ing attachments and while preventive 
measures. 

1. Attaching and removal of the 
flexible hose (pic. 1) 

Insert the tip of the flexible hose (4) 
into the inlet filter (7). Insert the hose 
till the clamp, confirming the rightness 
of the connection. To take off the flex-
ible hose press the clamps (5) and de-
tach the flexible hose.

2. Attaching of the extension pipe 
and attachments

-  Attach the extension pipe (2) to the 

flexible hose handle (3).(pic. 2). 

  Extent the bottom of the extension 

pipe for a needed length, pressing 
firstly the clamp button (pic. 3).

- 

Select the required brush: turbo 
brush (1), slit-type attachment (20), 
small brush (22) attachment for fur-
niture upholstery (21) and connect it 
to the extension pipe (2). 

5

              ENGLISH         

1839.indd   5

1839.indd   5

07.10.2010   15:59:25

07.10.2010   15:59:25