VITEK VT-1805 B - Инструкция по эксплуатации - Страница 6

6

the dust bag (17 or 23) at its place (Pic. 7). 

•  Close dust bag compartment cap (9).

Notice: It is recommended to clean the dust 
bag every time after vacuum cleaner usage. 

Inlet filter (16) removing and cleaning

(Pic. 7)

• Press the lock (8) and open the cap (9).

• Pull the inlet filter (16) up.

• Pull filter upward in lukewarm water and dry 

the filter completely.

• Insert inlet filter (16) at its place and close 

the cap (9). 

Notice: Wash inlet filter (16) regularly.

Inlet filter cleaning

•  Open inlet filter cap (21).

•  Take filter (20) out, wash it by warm water 

and dry.

•  Put the filter (20) into the cleaner and close 

the cap (21) (Pic. 8).

Notice: filter (20) should be cleaned at least 
once a year or when it becomes visible solid.

Vacuum cleaner housing

•  Swap the vacuum cleaner housing with wet 

cloth.

•  Do not let any liquids inside the housing.

•  Do not use dissolvent and abrasive deter-

gents to clean he surface of the housing.

Storage

Use special brush compartment (22) while 
storing the vacuum cleaner.

Technical  characteristics:

Voltage requirement:  

230 V ~ 50 Hz

Power requirement:  

1600 W

Suction power:  

300 W

Dust bag capacity:  

2 L

The manufacturer reserv es the right to 
change the device's characteristics without 
prior notice.

Service life - no less than 5 years.

GUARANTEE

Details regarding guarantee conditions can 
be obtained from the dealer from whom the 
appliance was purchased. The bill of sale or 
receipt must be produced when making any 
claim under the terms of this guarantee.

This product conforms to the 
EMC-Requirements as laid down 
by the Council Directive 89/336/
E E C   a n d   t o   t h e   Lo w   V o l t a g e 
Regulation (73/23 EEC)

 ENGLISH

Vt-1805.indd   6

Vt-1805.indd   6

26.09.2006   10:28:13

26.09.2006   10:28:13