Thomas Inox 1545 SFE - Инструкция по эксплуатации - Страница 12

11

Dry-vacuuming

Caution !

Never use the appliance for dry vacuuming
without a filter.

Plug the unit into the mains. Use the switch 3 on

the motor casing to switch the general-purpose

vacuum cleaner on and off.

Use of tools and accessories

Insert both suction tubes into the curved tube with

suction control.

Universal brush nozzle

For use on smooth floors (tiles, stone and PVC)

and carpets, as well as for vacuuming liquids.

Triangular nozzle

For vacuuming coarse debris, leaves, shavings

etc.

Crevice nozzle ø 32 mm

For vacuuming in corners, grooves and slits.

Crevice nozzle ø 50 mm/inclined tube
nozzle

For heavy soiling (e.g. wood shavings) in hard-to-

reach places.

After use

Switch off the appliance and pull out the plug.

Wind the mains cable loosely in the hand and sto-

re under the carrying handle.

Vacuuming liquids 

If a paper filter bag has been fitted in the app-

liance, remove it before vacuuming liquids, as it

will otherwise disintegrate. 
When cleaning moist or wet dirt, insert the

THOMAS long-life wet and dry filter. The paper

filter bag must be removed.
When vacuuming liquids from a container, use

only the flexible hose or suction tubes. 
Always ensure that the float is kept clean and in

good condition. It acts as a safety device and

automaticalIy interrupts the flow of air when the

collecting bin is full.
Take care when vacuuming water from high-sided

containers or basins where the quantity level

exceeds the liquid capacity of the collecting bin.

Remember that, in such a case, the water will

continue to flow from the container even if the

collecting bin is full and the float has stopped the

suction flow on the appliance.
Therefore, vacuum only small quantities of water

at a time and empty the collecting bin before

switching on again. 
Always lift the suction tube out of the water before

switching off the motor. Pull out the plug.

Warning! If petrol, point thinner fuel oil etc.
are mixed with suction air flow, explosive
fumes or compounds may be formed.

Acetones, acids and solvents may attack the

materials on your appliance. 

It is quite safe to vacuum water which contains

ordinary household cleaning agents. 

After vacuuming liquids, the collecting bin and all

accessories used should be wiped clean and left

to dry.

Care and maintenance 

Always pull out the plug before cleaning the

appliance! Never immerse the motor block in

water!
Clean the motor block casing and collecting bin

with a moist cloth and wipe dry. 
If there is a reduction in suction power, change

the paper filter bag.
If necessary, the collecting bin can be washed out

with water. Ensure that the bin is completely dry

before using again.
Rinse out collecting bin and all accessories used

with warm, soapy water after wet-vacuuming

(particularly sticky liquids). 

Do not use abrasive cleaning agents!

Operating

1250S-INOX 1545S 2005  21.11.2005  12:05 Uhr  Seite 11