Пылесос Polaris PVCR 3200 IQ Home Aqua - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
84
2. Push button again, and hold it down
,
until acoustic signal, or until the Wi-Fi indicator
starts to slowly flash.
3. Push button the third time, and hold it down
,
until acoustic signal, or until the Wi-Fi
indicator starts to flash more slowly. And wait until the appliance reboots (about 10 seconds).
ENABLING/DISABLING BUTTON LOCK (CHILDLOCK). PVCR 3200
Enabling
buttons lock
Lock on
indication
Indication
when
locking
Button
pressing
attempt
indication
Disabling
buttons lock
Lock off
indication
Button
holding
and
for 10
seconds
Short beep
The button
indicator
lights
up green
Three beeps
when any
button is
pressed
Button
holding
and
for 10
seconds
Long beep
VACUUM CLEANER FEATURES COVERED IN APPENDIX
(detailed description of features and peculiarities of the appliance operation is given in the following
chapter).
1.
Start/ stop
2.
Remote control of motion direction (joystick)
3.
Operation mode selection:
a.
Auto
b.
Perimeter cleanup
c.
Spiral (spot vacuuming)
d.
Return to the base
4. Cleanup scheduling per days of the week
6. Battery charge indication
7. Setting the suction power intensity in the dry cleaning mode
8. Room cleanup map
9. Displaying of errors during the appliance operation
VACUUM CLEANER OPERATION WITHOUT USING REMOTE CONTROL OPTION
1.
Place the vacuum cleaner on the floor so that its control panel faces upward (Fig. 8) Set the switch to "I"
position. This causes the button indicator light to illuminate in blue.
2.
To launch the main program, make a single-shot push on the
button on the device or
on the remote
control unit. This causes the button glittering. Once the start button illuminates steadily, the vacuum cleaner
starts the room cleaning. (Fig. 9)
3.
One more push on the
button on the device or
button on the control unit causes the cleanup cessation,
and the vacuum cleaner switches to "Pause" mode.
4.
To direct the device to the base, push the
button on the control unit. (Fig. 10) But before you need to
click button
on the remote control to end the cleaning mode.
