LG V-C3G42ND - Инструкция по эксплуатации - Страница 6

I

Changing the dust bag

The  dustbag  needs  changing  when  the  cleaner 

is  set  to  maximum  power  and  the  cleaner  head 

is  off  the  floor  but  the  “bag  full”  indicator 

window(18) is completely coloured red.

Even  If  the  dustbag  does  not  appear  to  be 

full at this stage, It should be changed.

It  could  be  that  a  great  deal  of  very  fine  dust 

has clogged up the pores of the dust bag.

• Turn off the appliance and unplug it.

•  Open  the  cover  by  pressing  the  hook(19) 

and lifting It up until it snaps Into place.

Your  appliance  Is  equipped  with  either  a 

paper dust bag (20) or a fabric dust bag

(22)(depending on model).

■  Take  hold  of  the  dust  bag  by  the  handle 

and  pull.Remove  the  bag  and  throw  It 

away.

• To refit a new bag push the cardboard 

support of a new bag into the bag mount 
(21)until it will go no further.

If  your  appliance  is  fitted  with  a  fab­

ric  dust  bag 

follow  the  same  Instructions 

as above.

Empty It and replace lt(22).

Note: 

as  the  appliance  Is  fitted  with  a  safety 

device  which  checks  that  the  bag  Is  In  place 

you  cannot  close  the  lid  If  the  bag  Is  not 
fitted correctly.

Cleaning the motor filter

The 

motor 

filter 

Is 

situated 

Inside 

the 

appliance  between  the  filter  supporter  (23) 
and  the  motor.  Each  time  that  you  change 

the  air  outlet  filter  we  advise  you  to  pull  the 

handle  on  the  filter  supporter,  remove  the 
motor  filter  (24)  and  to  clean  It  by  tapping 

to  remover  the  dirt  and  then  replacing  it  in 
the vacuum cleaner.

Cleaning the exhaust filter (25)

* Check the exhaust filter occasion-ally and 

clean when dirty.

*  Unplug cord from outlet.

* Open the exhaust cover (26) and remove 

exhaust filter as shown.

*  Next procedures are the same as the 

moter safety filter.

* Turbine brush nozzle (27).

'Easy & Powerful cleaning through 

adjusting the air-control lever (28).

^ : use for hard floor & short 

type carpet.

roflOOflOOfl 

: use for long type carpet.

' Cleaning turbine brush nozzle (29)

Press the button on the rear side of the 
nozzle to separate the air cover.

Use the dusting brush & crevice tool to 
vacuum clean the brush and fan.

What to do if your appliance

does not work?

Check  that  the  appliance  Is  correctly  plugged 
In and that the electrical socket Is working.

What to do when the suction

performance reduces?

' Stop the appliance and unplug it.

' Check that the tubes, flexible hose and 

cleaning tool are not blocked.

' Check that the dust bag Is not full.Replace 

if necessary.

-5-