LG V-C3G42ND - Инструкция по эксплуатации - Страница 5

I

Information for your safety

Please  read  all  the  following  Information, 

which  contains  Important  Instructions  for  the 
safety,  the  use  and  the  maintenance  of  the 

appliance.

This  appliance  complies  with  the  following  EC 

Directives: 

-73/23/EEC, 

93/68/EEC-Low 

Voltage Directive-89/336EEC -EMC Directive.

■  Never  allow  children  to  use  the  appliance 

unsupervised.

■ 

Do  not  use  the  appliance  If  the  supply 

cord is damaged or faulty.

■  If  the  mains  lead  is  damaged,  it  must  be 

replaced  by  an  approved  LG  Electronics 

Service Agent in order to avoid a hazard.

■ 

Always  switch  the  vaccum  cleaner  off 

before:

■ changing the dust bag.
• changing or cleaning the filters.

■  If  no  dustbag  is  inserted,  the  cover  cannot

be closed. Please do not use force!

■ 

Do  not  vacuum  flammable  or  explosive 

substances(liquids or gases).

■  Do  not  vacuum  hot  ash,  embers  etc.  nor 

sharp objects.

■  Do not vacuum water or other liquids.

How to Use

Connecting the flexible hose

Push  the  end  of  the  head(1)  on  the  flexible 
hose(2)  into  the  attachment  point  on  the 

vacuum cleaner.
To remove the flexible hose from the 
vacuum cleaner, press on the button(3) 
situated on the head, then pull upwards.

Assembling the tubes

(depending on model)

* Metal(or Plastic) Pipe(4)

-  Fit together the three tubes by twisting 

slightly.

•Telescopic tube(5)

-  Push spring latch(6) forward.
-  Pull out tube to required length.
-  Release spring latch to lock.

Using the cleaning head and Accessory

Nozzles 

(depending on model)

Fit  the  large  cleaning  head  onto  the  end  of 

the tube.

•  The  2  position  head(7) 

is  equipped  with  a 

pedal(8) 

which 

allows 

you 

to 

alter 

Its 

position  according  to  the  type  of  floor  to  be 

cleaned.

Hard 

floor 

position(tiles, 

parquet 

floors...).  Press  on  the  pedal  to  lower  the 

brush.

Carpet  or  rug  position. 

Press  on  the 

pedal to lift the brush up.

•  Crevice Tool(9)

For  vacuuming  in  those  normally  inaccess­
ible  places  i.e.  reaching  cobwebs,  or  down 

the side of a sofal

How to plug in and use

Pull  out  the  supply  cord  to  the  desired 

length and plug into the socket.

Press  button  (14)  to  start  the  vacuum  cleaner. 

To stop it press the button (14) again.

Adjusting the power level

•  If your appliance is equipped with an 

electronic variable power control(13), you 
can choose the power appropriated for the 
task. The more you slide the button towards 
the right, the greater the suction power.

•  The  flexible  hose  handle(15)  has  a  manual 

air  flow  regulator(16)  which  allows  you  to 
briefly reduce the suction level.

Storage(17)

When  you  have  switched  off  and  unplugged 
the  appliance,  press  on  the  button  (12)  to 

automatically rewind the cord.

You  can  move  or  store  your  appliance  In  a 
vertical  position  by  sliding  the  hook  on  the 

large  cleaning  head  Into  the  clip  on  the 
underside of the appliance.

-4-