LG T9PETNBEDRS с технологией Dual Kompressor - Инструкция по эксплуатации - Страница 14

14

Using Smart functions

Avoiding obstacles

The cleaner minimizes collision with nearby obstacles as 

much as possible using four laser sensors attached at 

both front side of the cleaner main unit.

• 

The obstacle avoiding function is available for some 

models only.

• 

Performance may be degraded if dust gathers on the 

laser sensor window. Wipe dust with a cotton swab.

• 

Be careful that the cleaner can collide with the thin 

desk leg, door, or obstacle lower than 30cm.

• 

The obstacle may not be detected because there can 

be a blind spot in the sensing area.

• 

The backing-up function is available to escape when 

collided with an obstacle in a blind spot.

• 

This product is a Class I laser device of which conform-

ity assessment is conducted in accordance with the 

IEC 60825-1.

Sensing 

area

Sensing 

area

Blind spot

Laser sensor 

window

Cotton swab

RoboSense (automatic moving function)

The cleaner automatically follows the user if the cleaner 

is away more than 1 meter while cleaning, using the gyro 

sensor and radio frequency (RF) sensor integrated in the 

cleaner main unit.

• 

RoboSense is available for some models only.

Transmitter 

sensor

About 1 m

Note

• 

If you press the "-" button for 3 seconds, you can turn 

RoboSense on or off.

• 

If RoboSense is on, the blue RoboSense LED on the 

top of the main body will be turned on.

• 

If RoboSense is off, the blue RoboSense LED on the 

top of the main body will be turned off.

 CAUTIoN

• 

Be careful that the cleaner can collide with a thin 

desk leg.

 CAUTIoN

• 

Be careful that the cleaner can collide with a door.

1 MFL69727402_en_180316.indd   14

2018-03-15   오전 10:35:55