LG CordZero A9MASTER2X - Инструкция по эксплуатации - Страница 27

27

EN

EN

1 

Wet both sides of the mop pads with water 

then squeeze out any excess water before 

attaching the pads.

•

Attaching and using mop pads in a dry state 

may affect the cleaning performance.

2 

Place the mop nozzle upside down on the 

floor.

3 

Align and attach the center of the mop pad 

with the center of the mop attachment plate.

•

Attach the mop pad so the striped side 

is visible. Attaching the mop pad upside 

down or improperly may affect the cleaning 

performance.

4 

Attach the mop nozzle to the appliance. 

WARNING

•

To avoid injury, do not attach the mop pad while 

the mop attachment plate is rotating.

•

Do not insert your hand into the rotating mop 

attachment plate. Doing so may result in injury.

Adjusting the Amount of Water

Press the water adjustment buttons to adjust the 

amount of water released onto the mop pad to 

either 

High Mode

 or 

Low Mode

.

•

High Mode

: Press the 

High Mode

 button 

a

 all 

the way down to clean ingrained dirt or supply 

a large amount of water.

•

Low Mode

: Press the 

Low Mode

 button 

b

all the way down to supply a small amount of 

water for cleaning wood or other flooring that 

can be damaged by too much water.

•

STOP

: Press the 

Low Mode

 or 

High Mode

button halfway to toggle back to the 

STOP

position. This stops the supply of water so you 

can go over areas that are already wet.

•

To clean with a dry mop, set the water 

adjustment buttons to the 

STOP

 position.

•

By default, the water adjustment button is set to 

the Low Mode.

Cleaning with the Mop Nozzle

1 

Attach the water tank and mop pads to the 

mop nozzle. 

2 

Press the Power button to start cleaning.

CAUTION

•

Set the water adjustment button to the 

STOP

position when not using the appliance for an 

extended period of time. Failure to do so may 

result in product failure. 

•

Do not step on the mop nozzle. Doing so may 

result in product damage.