LG CordZero A9ESSENTIAL - Инструкция по эксплуатации - Страница 28

28

EN

Drying the Water Tank and Mop 

Pads

Drying the Water Tank

When cleaning is completed, make sure to empty 

the water and dry it before storing the mop nozzle. 

Otherwise the water may be contaminated and 

give off a bad smell. 

1 

Open the 2 water inlet caps 

a

 on the side 

of the water tank and empty the water in the 

water tank. Shake the water tank to remove 

the remaining water.

2 

Leave the 2 water inlet caps open and allow 

the water tank to dry in a well-ventilated area 

out of direct sunlight for at least 24 hours.

CAUTION

•

Turn the water inlet caps to make sure they 

remain open.

•

Do not remove the water inlet caps from the 

water tank.

•

Do not add detergent, vinegar or baking soda 

to the water tank when washing.

Drying the Mop Pads

After using the mop pads, hand wash them and 

allow them to dry before storing them.

1 

Separate the mop pads from the mop 

attachment plate.

2 

Hand wash the pads with a neutral detergent. 

3 

Set the pads in a well-ventilated area out of 

direct sunlight for at least 24 hours or until 

completely dry.

CAUTION

•

After cleaning, wipe off any remaining water on 

the water supply inlet 

a

 on the mop nozzle with 

a soft cloth. The water could drip onto the floor 

and damage it.

•

Do not pull or stretch the rubber gasket on the 

water supply inlet on the mop nozzle. Doing so 

could tear or damage the rubber.

NOTE

•

Storing mop pads in a damp state can result in 

an unpleasant odor.

•

Hand-wash the mop pads with a neutral 

detergent.

•

Do not use bleach or fabric softener when 

washing the mop pads.

•

Do not dry the pads in a clothes dryer.

•

Do not boil the mop pad. The mop pad may 

become deformed.