LG CordZero A9-LITE - Инструкция по эксплуатации - Страница 38

38

EN

Before Calling for Service

Troubleshooting Guide

Save time and money by checking the following before calling for service.

Symptoms

Possible Causes & Solution

The appliance 

does not 

operate.

Battery is fully discharged. 

•

Charge the battery.

Appliance is turned off.

•

Press the power button to turn on the appliance.

Suction power is 

too weak.

Dust bin is full of dust. 

•

Empty the dust bin.

Filters are clogged.

•

Clean the pre-filter and the exhaust filter.

Inlet is clogged.

•

Remove any foreign objects from inside the product body or the extension pipe.

Foreign object is on rotating brush, or in inlet port.

•

Remove any foreign objects (thread, hair) from the rotating brush or the inlet port.

The product 

body does not 

appear to be 

charging.

Power adapter is not connected to the charging station.

•

Plug the adapter firmly into the charging station.

Power cord is unplugged.

•

Plug the power cord securely into the charging station.

Foreign object is on the charging terminals.

•

Remove dirt or foreign objects from the charging terminals with a dry cloth.

A strange odor is 

coming from the 

appliance.

Appliance was purchased within the last 3 months.

•

The cleaner may emit a smell of rubber for about 3 months after purchase.

Dust bin is full of dust.

•

The dust in the bin may cause some odor. Empty the bin and clean it.

Foreign object is on the filter.

•

The filter may emit an odor if it has not been cleaned for some time. Clean the 

pre-filter and exhaust filter regularly.

Pre-filter was installed while damp or wet.

•

Wash the pre-filter with running water. To avoid odor, allow the pre-filter to dry 

completely in a well-ventilated area out of direct sunlight for at least 24 hours 

before reassembling.

Exhaust filter was installed while damp or wet.

•

Wash the exhaust filter with running water. To avoid odor, allow the exhaust filter 

to dry completely in a well-ventilated area out of direct sunlight for at least 24 

hours before reassembling.

Foreign object is on the dust inlet of the mop nozzle.

•

Wet dust in the mop nozzle may result in odor. Make sure to wipe the dust inlet of 

the mop nozzle with a wet wipe after each use.

TROUBLESHOOTING