LG A9N-CORE - Инструкция по эксплуатации - Страница 26

26

EN

3 

Align and attach the center of the mop pad 

with the center of the mop attachment plate.

•

Attach the mop pad’s velcro to the mop 

attachment plate, align and attach the 

centre of the mop pad with the centre of the 

mop attachment plate.

4 

Attach the mop nozzle to the appliance. 

WARNING

•

To avoid injury, do not attach the mop pad while 

the mop attachment plate is rotating.

CAUTION

•

Do not let the appliance stand on the floor while 

the wet mop pads are attached. Doing so may 

result in damage or swelling to wood flooring.

Adjusting the Amount of Water

Press the water adjustment buttons to adjust the 

amount of water released onto the mop pad to 

either 

High Mode

 or 

Low Mode

.

•

High Mode

: Press the 

High Mode

 button 

a

 all 

the way down to clean ingrained dirt or supply 

a large amount of water.

•

Low Mode

: Press the 

Low Mode

 button 

b

all the way down to supply a small amount of 

water for cleaning wood or other flooring that 

can be damaged by too much water.

•

STOP

: Press the 

Low Mode

 or 

High Mode

button halfway to toggle back to the 

STOP

position. This stops the supply of water so you 

can go over areas that are already wet.

Cleaning with the Mop Nozzle

1 

Attach the water tank and mop pads to the 

mop nozzle. 

2 

Set the water adjustment button to the 

STOP

position.

3 

Press the Power button to start cleaning.