Philips FC6841 - Инструкция по эксплуатации - Страница 10

  9 

 Fasten the long shampoo hose to the suction hose and suction tube with the shampoo hose 

clips (Fig. 32).

 10 

 Attach the double-injection nozzle (Fig. 6).

The appliance is now ready for shampooing soft floors, such as carpets and rugs.

using the appliance

  1 

 Pull the mains cord out of the appliance and insert the mains plug into the wall 

socket (Fig. 33).

  2 

 Press the motor on/off button to switch on the appliance (Fig. 34).

Dry use
Convertible nozzle 

  1 

 You can use the convertible nozzle to vacuum hard and soft floors: (Fig. 35)

 - With the brush strip folded out, you can use the nozzle to clean hard floors (wooden, ceramic, 

stone and synthetic floors)

 - With the brush strip folded in, you can use the nozzle to clean soft floors (carpets and rugs)

Wet use
vacuuming liquids

Note: When you vacuum water from a place that is located higher than the appliance itself (e.g. a roof 

gutter or roof water tank), the appliance inevitably functions as a syphon. As a result, the container fills up 

more quickly than usual and may overflow. Make sure you never exceed the maximum capacity of the 

container (9 litres/2 gallons) (Fig. 36).

To make sure that the container does not overflow when you vacuum liquids, perform the following 

procedure at regular inter vals: 

  1 

 Lift the nozzle out of the water.

  2 

 Press the motor on/off button to switch off the appliance.

  3 

 Remove the mains plug from the wall socket.

  4 

 Empty the container. 

shampooing carpets

  1 

 Start as far away from the door as possible and then work your way towards the door.

  2 

 Apply shampoo by squeezing the trigger on the handgrip of the tube (Fig. 37).

  3 

 Make overlapping strokes to cover the entire area to be cleaned.

Note: If there are still traces of liquid on the area you have just cleaned, pass the vacuum cleaner over 

this area once more without applying shampoo.

  4 

 After shampooing, release the trigger and switch off the pump. Keep the appliance switched 

on (Fig. 38).

  5 

 Lift the nozzle off the floor. Then simply let the appliance suck in dry air for some time to dry 

the inside of the suction hose and tube (Fig. 39).

  6 

 Switch off the appliance.

Carpet shampooing techniques

Depending on the degree of soiling, you can use (and combine!) the following three carpet 

shampooing techniques.

1 

Freshening up

English

10