Philips FC6144 - Инструкция по эксплуатации - Страница 8

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding 

electromagnetic fields (EMF). If handled properly and according to the 

instructions in this user manual, the appliance is safe to use based on 

scientific evidence available today.

Preparing for use

installing the charger 

  1 

 Attach the charger to the wall as shown in the figure.  (Fig. 2)

If you attach the charger to the wall, the space between the screw holes 

has to be 12cm.

  2 

 You can also place the charger on a horizontal surface (e.g. a table 

or desk) (Fig. 3).

  3 

 Wind excess mains cord around the reel in the back of the charger 

and pass the cord through the slot (Fig. 4).

Charging the appliance

Charge the appliance for at least 16 hours before you use it for the first 

time.

  1 

 Make sure the appliance is switched off.

  2 

 Put the adapter in the wall socket.

  3 

 Place the vacuum cleaner on the charger (Fig. 5).

 - Make sure you place the opening in the back of the vacuum cleaner 

on the hook of the charger (Fig. 6).

,

The charging light goes on to indicate that the appliance 

is charging (Fig. 7).

Note: The charging light stays on as long as the appliance is in the plugged-in 

charger. 
Note: The charging light does not give any information about the battery 

charge level of the vacuum cleaner.

English

8