Philips FC6144 - Инструкция по эксплуатации - Страница 12

  6 

 Clean the inner filter and the outer filter with a brush or with a 

normal vacuum cleaner if it is very dirty.

Note: If necessary, you can clean the inner filter and the outer filter in cold or 

lukewarm water. Dry the inner and outer filter thoroughly before you use the 

filter unit again.

  7 

 Put the inner filter back into the outer filter (1) and turn it 

clockwise to lock it (2) (Fig. 21).

  8 

 Put the filter unit back into the dust compartment (Fig. 19).

Note: Make sure you insert the filter unit in the correct way.

  9 

 To reattach the dust compartment, align the slot on the dust 

compartment with the projection on the appliance. First attach the 

bottom of the dust compartment (1) and then push the top of the 

dust compartment towards the appliance (2) until it locks into 

place (‘click’) (Fig. 16).

storage

  1 

 You can store the vacuum cleaner and the accessories on the 

charger (Fig. 22).

replacement

We advise you to replace the inner filter after a prolonged period of use 

or if you can no longer clean it properly.

replacing the inner filter (FC6144/FC6140)

  1 

 Remove the filter unit from the dust compartment (Fig. 14).

  2 

 Turn the outer filter anticlockwise (1) and remove it from the filter 

holder (2) (Fig. 17).

  3 

 Gently turn the inner filter anticlockwise (1) and remove it from 

the filter holder (2) (Fig. 23).

  4 

 Place a new inner filter on the filter holder (1) and turn it 

clockwise to attach it (2) (Fig. 24).

English

12