JIMMY JV71 - Инструкция по эксплуатации - Страница 10

8

 Clean nozzle hose

1.Push the two nozzle base cover latches 

towards middle and release nozzle base 

cover.

Nozzle base cover slide

2.Remove nozzle base cover and pull out hose 
t o  cl e an  or   r e pl ace .   A s s e m bl e   in  oppos it e 
sequence.

Nozzle base cover

Hose connector

Machine Storage

Store the machine in cool and dry place, avoid direct sunlight or humid environment.

Safety Notes

 Warning! Read all safety warnings and all instructions before use. Failure to follow the 

warnings and instructions may result in injury.

This vacuum cleaner is designed for home use. Do not use it for commercial or other purposes.

1.Do not use the vacuum to pick up detergent, oil, glass slag, needle, cigarette ash, wet dust, 
water, matches, etc.

2. Do not use the vacuum to pick up tiny particles such as cement, gypsum powder, wall powder, 
or large objects such as paper balls, otherwise it will cause malfunctions such as blockage and 
motor burnout.

3. Do not put the vacuum close to fire or other high temperature facility.

4.When using the vacuum, make sure HEPA and brush roll are assembled, otherwise, it may lead 
to motor fan blockage, causing motor burn out.

5.Avoid blockage to air inlet or brushroll, it may cause motor failure.

6.Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out 
the machine.

7.Fully charge the battery before first use or after long storage. When storing the unit for a long 
time, ensure that the battery is fully charged before storage and charge the machine at least 
every three months.

8.Unplug the charger to clean or repair the machine. Hold the charger when plugging or 
unplugging it, and do not pull the charging cord.