JIMMY JV53 - Инструкция по эксплуатации - Страница 12

10

Symptoms

Possible Causes

Solutions

Motor is not working

Battery has no power

Charge the vacuum cleaner

Motor is not working

Metal tube, electric floor had, 
battery pack is not assembled 
correctly to the mainbody

Check the accessories are 
assembled correctly to the 
mainbody

Low suction

Dust cup is full

Empty dust cup

Low suction

HEPA is blocked by dust

Clean or replace HEPA

Trouble Shooting

Please check the following issues before sending to designated repair offices.

Attention:If any other failures occurred, which need professional tools, in order to avoid danger, the machine must be 
repaired or replaced by manufacturer, other maintenance offices or professionals from similar offices.

When discard the machine, please press the button to release the battery pack, take out the 
battery pack, make sure the machine is disconnected with power and handled properly. Do not 
throw into fire,water or soil.

If the battery liquid leakage touches your skin or clothes, wash it with water, if there is any 
discomfort, please go to hospital immediately.

Do not use non-original battery pack, avoiding machine damage and safety problems.

Avoid to use the vacuum cleaner to pick up easily blockable things such as: plastic bags, candy 
paper, big scrap of paper, which might affect the function, even cause failure of working. Please 
clean the foreign matter on the floor head in time, then it will work normally. The discarded 
battery pack shall be recycled safely, do not throw away casually.

Low suction

Floor head hose or brushroll   

blocked

Clean the floorhead

Charging indicator 

did not turn red 

during charging

Battery pack is not well 
assembled

 Reassemble battery pack

Short run time after 

charging

Battery not fully charged

Follow instruction manual to 

fully charge the battery

Short run time after 

charging

Battery old aging

Replace new battery