JIMMY H8Pro - Инструкция по эксплуатации - Страница 8

6

Use of the product

Attn: 
1.When use the product for first time, battery power 

is not full. Need to charge the vacuum before using.

2.When battery capacity is lower than 20%,the 

machine will automatially change to Eco mode, and 

cannot run in max mode.

Charging

When the vacuum cleaner power is insufficient, charge 

the vacuum cleaner in time ; When the voltage is too 

low, to protect the battery, vacuum cleaner will be 

automatic power-off, at this time the vacuum cleaner 

need to be charged. When charging, assemble battery 

pack to machine, plug the charger connector into the 

A/C power socket and another end to vacuum cleaner 

to start charging. When the handheld vacuum cleaner 

LED display shows an increase in power, it indicates 

that the vacuum cleaner is charging. When charging is 

completed, LED display show 100% power.(Fig 10)

Attn:
1.After charging, please pull the charger plug off power 

socket and stop charging.

2. If power cord is damaged, to avoid danger, itmust be 

replaced by a professional people of the manufacturer, 

repairing agent or similar department.

Use of Handheld Vacuum Cleaner

Take the vacuum cleaner off the holder, press the on/

off button on the handle to start or stop of the vacuum 

cleaner. When machine is turned on, it works in Auto 

mode, press the power button to switch to Turbo 

mode, press again to switch to Max mode and again 

to switch to Eco mode. The vacuum cleaner working 

mode switches in the sequence of Auto, Turbo, Max, 

Eco mode through pressing mode button.(Fig 11)

Vacuum cleaner working mode:
Auto Mode: Adjusts power automatically according to 

different floor type, suitable for all types of floor.

Turbo Mode: Suitable for short hair carpet

Max: Mode: Suitable for long hair carpet

Eco Mode: Suitable for hard floor like wooden floor, tile 

etc.

10

11

12

14

13