Dreame P10 - Инструкция по эксплуатации - Страница 22

18

FAQ

If the vacuum is not working properly, please refer to the table below.

Errors

Possible Causes

Solutions

Vacuum does not work.

Vacuum is out of battery or 

low on power.

Fully charge the vacuum, 

then resume use.

Overheat protection mode 

triggered by a blockage.

Clean the suction openings 

or air duct. Wait until the 

vacuum cools down, then 

reactivate it.

Suction opening or airway 

passage is blocked.

Clear any blockage from 

suction opening or air duct.

Weak suction force.

Dust bin is full and/or HEPA 

filter assembly is clogged.

Empty the dust bin and 

clean the HEPA filter 

assembly.

Attachment is blocked.

Clear any blockages in the 

attachment.

Motor makes a strange 

noise.

Main suction opening or 

extension rod is blocked.

Clear any blockage in the 

main suction opening or 

extension rod.

The battery indicator does 

not light up when charging.

The charger does not plug 

into the vacuum well.

Check whether the charger 

is properly plugged into the 

vacuum.

The battery is charged 

and switches to Sleep 

Mode automatically.

The vacuum runs normally.

If the problem persists after 

ruling out the above two 

possibilities.

Please contact the after-

sales service department 

for maintenance.

Charging too slow

Battery temperature is 

too low or too high.

Wait until the battery's 

temperature returns 

normal, then resume use.

EN