Dreame P10 - Инструкция по эксплуатации - Страница 11

7

Wall Mount  Installation Diagram

The mount should be installed in a cool, dry place near a power outlet. Make sure the 

installation area is clear of any pipes such as gas or water lines, and air ducts, electric wires 

and cables, or drainage lines.

Connecting the Charging Adapter to the Wall Mount

1. Rotate the clip in the bottom of wall mount 90 degrees counterclockwise to remove it 

from the mount.
2. Insert the charging adapter cord into the notch on the clip.
3. Rotate the clip 90 degrees clockwise until it clicks into place.

1. Before installation, measure the wall in the height of 100cm above the ground.
2. Mark and drill two 8mm diameter holes into the wall with an electric drill. Insert the wall 

plugs into the holes.
3. Align the position holes on the mount with the holes on the wall. Fasten it to the wall 

with the included screws.

Installation

100cm

EN