Dreame Cordless Vacuum Cleaner V10 White (VVN3) - Инструкция по эксплуатации - Страница 9

12

6

1

11

5

7

2

10

4

8

3

9

24 hrs

1. Push the brushbar head release button in the direction of the arrow until the cover 

of the brushbar head pops to open, then remove the brushbar head by lifting it in the 

direction indicated.
2. After you have finished cleaning the Soft Roller Nozzle , reinstall it by following the 

disassembly steps in reverse.

Cleaning the Soft Roller Nozzle

Note: To prevent injury from accidentally turning on the vacuum, make sure the Soft 

Roller Nozzle or Mini-Motorized Nozzle is detached from the vacuum before 

removing the head. The Mini-Motorized Nozzle and Soft Roller Nozzle contain 

electrical components, and the Soft Roller Nozzle head also contains bearings. Do 

not wash these parts with water. Be careful of sharp objects when removing debris 

caught in the heads of Soft Roller Nozzle and Mini-Motorized Nozzle.

Care & Maintenance

Cleaning the Soft Roller Nozzle and 

Mini-Motorized Nozzle

Care & Maintenance

Cleaning the Mini-Motorized Nozzle

1. Use a coin as illustrated to rotate the 

lock counterclockwise until you hear a 

click.

2. After unlocking the brush head, 

remove it from the Mini-Motorized 

Nozzle , then rinse and clean the brush 

head.

3. Stand the brush head upright in a 

well-ventilated area for at least 24 hours 

until it is fully dry.

4. Once the Mini-Motorized Nozzle is dry, 

reinstall it by following the disassembly 

steps in reverse.

13

14