Пылесос Bosch Unlimited Serie | 6 BCS612KA2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Cleaning and servicing
en
37
3.
To remove the dust container,
press the release button.
→
4.
Remove the filter unit from the dust
container.
→
5.
Empty the dust container.
6.
If there is dirt underneath the ejec-
tion opening, remove the dirt.
7.
Insert the filter unit into the dust
container and check that it is
seated correctly.
→
8.
Insert the dust container.
a
The dust container audibly clicks
into position.
Cleaning the filter unit
When you empty the dust container,
also clean the filter. This gives you a
good vacuuming result.
ATTENTION!
Penetrating moisture may damage
the filters.
▶
Never allow the filters to come into
contact with liquids.
Requirement:
The appliance is
switched off.
→
"Switching off the appliance",
1.
Remove the dust container.
→
2.
Remove the filter unit from the dust
container.
→
3.
To unlock the cartridge filter, turn
the filter unit in the direction.
→
4.
Remove the cartridge filter.
5.
Tap out the cartridge filter over a
bin.
→
6.
Lightly shake the fluff filter over a
bin and lightly tap on it.
→
7.
Clean the fluff filter with a dry cloth.
8.
Insert the cartridge filter into the
fluff filter.
→
9.
Lock the cartridge filter in the dir-
ection.
10.
Insert the filter unit into the dust
container.
→
11.
Insert the dust container.
a
The dust container audibly clicks
into position.
Cleaning the nozzles
Requirement:
The appliance is
switched off.
→
"Switching off the appliance",
1.
Disconnect the nozzle from the ap-
pliance.
2.
Release the brush roller.
→
3.
Remove the brush roller sideways
from the nozzle.
4.
Use scissors to cut through
threads and hairs wound round the
brush and then remove them.
→
5.
Insert the brush roller sideways
along the guide bar and into the
nozzle.
→
6.
Lock the brush roller.
