Пылесос Bosch BSG 6208 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
9
en
Fold out picture pages.
Before using for the first time
Figure
Push the handle onto the flexible tube and until it
engages.
Figure
Push the crevice nozzle and upholstery nozzle back into
the accessories holder as illustrated.
Setting up
Figure
a)
Push the flexible hose adapter into the air intake opening
on the vacuum cleaner lid until it engages.
b)
To remove the flexible hose, press the two lugs together
and pull the tube out.
Figure
Push the handle into the suction pipe/telescopic tube.
To remove it, turn the handle slightly and pull it off the
tube.
Figure
Insert the suction pipe/telescopic tube into the adapter of
the floor tool.
To remove it, turn the tube slightly and pull it out of the
floor tool.
Figure
a)
Connect the suction pipes together, or
b)
Unlock the telescopic tube to adjust its length by moving
the sliding switch in the direction of the arrow.
Figure
Holding the power cord by the plug, pull out the required
length and plug it into the mains socket.
Figure
Press the on/off button in the direction of the arrow to
switch your vacuum cleaner on/off.
Figure
Adjust the suction by turning the on/off button in the
direction of the arrow.
9
8
7
6*
5*
4*
3
2*
1*
Vacuuming
Figure
Adjusting the floor tool:
Rugs and carpets
=>
hard floors
=>
Figure
Adjust the "autofloor" floor tool:
Hard floor setting
=>
Fixed position for vacuuming hard floors/ parquet
Automatic setting
=>
auto
The nozzle adjusts automatically to the floor covering
and switches from hard floors/ parquet to carpeted floors
Carpet setting
=>
Fixed position for vacuuming rugs and carpets
If you are vacuuming varying types of floor coverings
(hard floors <-> carpets), we recommend that you use
the automatic setting so that the nozzle adjusts
automatically to the floor and you do not need to switch
over the nozzle setting.
Figure
Remove the upholstery nozzle and crevice nozzle from
the accessories holder as illustrated.
Figure
Vacuuming with accessories
Attach the nozzles to the suction pipe or handle as
required:
a)
Crevice nozzle for vacuuming crevices and corners, etc.
b)
Upholstery nozzle for vacuuming upholstered furniture,
curtains, etc.
c)
Furniture brush
For cleaning window frames, cabinets, mouldings, etc.
d)
Hard-floor brush
For vacuuming hard floor coverings (tiles, parquet
flooring, etc.)
Figure
After use, push the crevice nozzle and upholstery nozzle
back into the accessories holder as indicated.
Turbo brush
If your vacuum cleaner is equipped with a turbo brush,
please consult the accompanying instruction manual for
notes on use and maintenance.
Figure
When stopping cleaning for a moment, you can use the
parking aid on the back of the vacuum cleaner.
Once you have switched off the vacuum cleaner, slide
the catch on the floor tool into the groove on the rear of
the appliance.
Figure
The appliance can also be carried using one of the two
handles when vacuuming steps, for example.
16
15
14
13*
12
11*
10
*Depending on equipment
