Bosch BGS72058 - Инструкция по эксплуатации - Страница 46

44

* Dependent on model 

Vacuum cleaner with “RotationClean” function

Fig. 

21*

The indicator lights up blue when the appliance is 
working at its optimum level. Once the indicator turns 
red and flashes, the plate filter must be cleaned. The 
appliance is automatically adjusted back to the lowest 
power setting.

Fig. 

22*

‡

 Switch the appliance off in order to clean the plate 
filter.

!

  Caution: the filter can only be cleaned if the appli-

ance is switched off.

‡

 Open the appliance lid by pulling the locking tab.

‡

 To clean the plate filter, turn the knob at least three 
turns through 18 0 °. 

You can also clean the filter if the suction is becoming 
less power ful, even if the indicator has not lit up. We 
recommend that you clean the plate filter each time 
before emptying the dust container. It must be clea-
ned at the latest when the “Sensor Control” indicator 
lights up.
If the indicator flashes three times in quick succes-
sion, even though the plate filter is clean, this is 
probably due to a dir ty fluff filter or a blockage. In 
this case, the appliance automatically adjusts to the 
lowest power setting and the indicator lights up red 
permanently.

‡

 Switch the appliance off, empty the dust container 
and clean the fluff filter according to the instruc-
tions in "Cleaning the fluff filter". 

Fig.

26

Vacuum cleaner with “SelfClean” function 

Fig. 

23*

The indicator lights up blue when the appliance is 
working at its optimum level. Once the indicator turns 
red and flashes, the appliance switches off automa-
tically 
Filter cleaning is activated and per formed by the 
integrated cleaning motor.

If the appliance cleans three times in quick succes-
sion, this is probably due to a dir ty fluff filter or a 
blockage. In this case, the appliance automatically 
adjusts to the lowest power setting and the indicator 
lights up red. 

‡

 Switch the appliance off, empty the dust container 
and clean the fluff filter according to the instruc-
tions in "Cleaning the fluff filter". 

Fig.

26

Fig. 

24*

If required, you can also activate the cleaning proce -
dure manually by pressing the "Clean" filter cleaning 
button when the appliance is switched on.
If suction power is reducing, you can also clean the 
filter even if the indicator has not lit up. We recom-
mend that you clean the plate filter each time before 
emptying the dust container.

Tapping out the plate filter

Fig. 

25

If the plate filter is par ticularly dir ty, the dir t can also 
be tapped out.

‡

 Tap out the filter over a dustbin.  

The dir t will fall down out of the filter.

Cleaning the fluff filter

The fluff filter should be cleaned at regular inter vals 
in order to ensure optimum operation of the vacuum 
cleaner.

Fig. 

26

‡

 Open the appliance lid and remove the dust 
container from the appliance. 

Fig.

18

a) 

 Take the filter unit out of the dust container. 

b) 

 It is usually suf ficient to lightly shake or tap out the 
whole filter unit when the dust container is emptied 
in order to dislodge any par ticles of dir t.

‡

If this is not suf ficient, you can use a dr y cloth to 
remove dir t par ticles from the fluff filter.

Cleaning instructions

Always switch off the vacuum cleaner and disconnect 
the power cord from the mains before cleaning the va-
cuum cleaner. The vacuum cleaner and plastic acces-
sories can be cleaned with an ordinar y plastic cleaner.

!

 Caution: 
   Do not use a scourer, glass- cleaning agent or mul-

tipurpose cleaning product. Never immerse the va-
cuum cleaner in water.

Subject to technical modifications.