Bosch BGS 5200R - Инструкция по эксплуатации - Страница 44

42

en

Congratulations on your purchase of the Bosch 
Rela x x´x vacuum cleaner.
This instruction manual describes various Rela x x´x 
models, which means that some of the equipment 
features and functions described may not apply 
to your model. You should only use original Bosch 
accessories, which have been specially developed 
for your vacuum cleaner, to achieve the best possible 
vacuuming results.

Fold out the picture pages.

Your vacuum cleaner

1  

Adjustable floor tool with accessory connection

2  

Telescopic tube with sliding switch and accessory 
connection

3  

Accessories holder

4  

Flexible hose

5  

Handle

6  

Brush ring (to fit on the upholstery nozzle)*

7  

Parking aid on the side of the appliance

8  

Power cord

9  

Dust container

10  

Upholstery nozzle

11  

Crevice nozzle

12  

"Clean" filter cleaning button*

13  

Power level indicator

14  

On/Off button with electronic suction regulator

15  

Appliance lid

16  

Carrying handle

17  

Storage aid on the underside of the appliance

18  

Plate filter

19  

Fluff filter

20  

Professional upholstery nozzle*

21  

Professional crevice nozzle*

22 Hard-floor tool*

23 Hard-floor tool*

* Dependent on model 

Replacement parts and special accesso-

ries

A  Hard-floor nozzle BBZ123HD

For vacuuming hard floors 
(parquet, tiles, terracotta, etc.)

B  Hard-floor nozzle BBZ124HD

With 2 rotating brush rollers

For caring for expensive hard floors 
and for the improved collection of 
coarse dir t.

Before using your appliance for the first 
time

Fig. 

1

‡

 Push the handle onto the flexible hose and lock it in 
place.

Initial use

Fig. 

2

a) 

 Push the flexible tube adapter into the air intake 
opening on the appliance and lock it in place. You 
will hear an audible 'click'. 

b) 

 To remove the flexible hose, press the two catches 
together and pull out the hose.

Fig. 

3

a) 

 Push the handle into the telescopic tube. To remove 
it, turn the handle slightly and pull it out of the 
tube. 

b) 

 Push the handle into the telescopic tube until it 
locks into place. To release the connection, squee -
ze the collar sleeve and pull the handle out.

Fig. 

4

a) 

 Inser t the telescopic tube into the connecting piece 
of the floor tool. To release the connection, turn the 
tube slightly and pull it out of the floor tool.

b) 

 Push the telescopic tube into the connecting piece 
of the floor tool until it locks in place. To release 
the connection, press on the locking collar and pull 
out the telescopic tube.

Fig. 

5*

‡

 Unlock the telescopic tube by moving the sliding 
switch in the direction of the arrow and adjust to 
the desired length. The slide resistance on carpet 
is at its lowest when the telescopic tube has been 
completely pulled out.