Bosch BGS 3U2000 - Инструкция по эксплуатации - Страница 54

47

HEPA filter

Cleaning a washable HEPA filter

The HEPA filter with the "washable" imprint is designed 
so  that  it  does  not  need  to  be  replaced,  provided  the 
appliance is used as intended in the household.
To ensure that the vacuum cleaner is working at its op -
timum power level, the exhaust filter should be rinsed 
out after one year. The filtering action of the filter re -
mains intact, even if the filter sur face becomes disco -
loured.

Fig. 

27*

a) 

Open the lid of the exhaust filter by pushing and 
pulling on the locking tab.

b) 

Unlock the HEPA filter and remove it from the ap -
pliance.

c) 

Tap out the filter unit and rinse it under running wa-
ter. 

 Alternatively, the unit can be cleaned in a washing 
machine at max. 30 °C using a gentle programme 
and the lowest spin speed.  

TIP:

  To protect other laundr y items, put the filter 

unit into a laundr y bag.

d) 

Once the HEPA filter has dried completely (at least 
24 hours), inser t it back into the appliance and lock 
it in place.

>

= Close the exhaust filter lid. In doing so, push the 

lock bar upwards until it audibly clicks into place.

Micro filter

Cleaning the micro filter

The micro filter is designed so that it does not need to 
be replaced, provided the appliance is used as inten-
ded in the household.
To ensure that the vacuum cleaner is working at its op -
timum power level, the exhaust filter should be rinsed 
out after one year. The filtering action of the filter re -
mains intact, even if the filter sur face becomes disco -
loured.

Fig. 

28

a) 

Open the lid of the exhaust filter by pushing and 
pulling on the locking tab.

b) 

Pull the locking tab to unlock the filter unit with foam 
filter and microfilter and remove it from the appli-
ance.

c) 

Remove the foam filter and microfilter from the filter 
frame.

d) 

Rinse the foam filter and micro filter under run-
ning water. Alternatively, they can be cleaned 
in the washing machine at max. 30 °C using a 
gentle programme and the lowest spin speed. 

TIP:

  To protect other laundr y items, put the unit into 

a laundr y bag.

e) 

Once the foam filter and microfilter have dried com-
pletely (at least 24 hours), inser t them back into the 
filter frame.

f) 

Inser t the filter unit in the appliance and ensure that 
the locking tabs audibly click into place.

g) 

Close the exhaust filter lid. In doing so, push the lock 
bar upwards until it audibly clicks into place.

* Dependent on model 

Cleaning instructions

Always switch off the vacuum cleaner and disconnect 
the power cord from the mains before cleaning the va-
cuum cleaner. The vacuum cleaner and plastic acces-
sories can be cleaned with an ordinar y plastic cleaner.

!

 Caution: 
   Do not use abrasive materials, glass- cleaning 

agents or all-purpose cleaning products. Never im -
merse the vacuum cleaner in water.

Subject to technical modifications.