Bosch BBS 1114 - Инструкция по эксплуатации - Страница 49

47

80 01 108 997 - 980320

Runtime

Like ever y other Li-Ion batter y the Power for ALL bat-
ter y is subject to natural wear as well. That means the 
batter y capacity and thus runtime decrease over time. 
This is a natural aging process and not the result of a 
material/production failure or a product defect. 

For one 3,0Ah Bosch 
Power for ALL battery

On normal mode with 
non-electrical accesso-
ries for cleaning furniture 
etc.

Up to 60 min.

On normal mode with 
electrical nozzle for 
normal cleaning tasks

Up to 45 min.

Turbo mode with elec-
trical loor nozzle and 
for demanding cleaning 
tasks

Up to 7 min.

The natural wear can be prolonged with the following 
measures:

•

Charge the batter y only within a temperature range 
between 0 °C and 45 °C.

•

Store the batter y only within a temperature range   
between -20 °C and 50 °C.

•

Do not store the batter y fully-charged or completely 
discharged over a long period of time.

Fig. 

9 

 Vacuum-cleaning with accessories

Attach the nozzles to the suction tube or the appliance's 
connection port as required:

a) 

 Crevice nozzle for vacuuming crevices and corners, etc.

b) 

2-in-1 furniture brush with upholstery nozzle for vacu-
um-cleaning window frames, cupboards, furniture, etc.

•

 After use, reinsert the crevice nozzle and 2-in-1 fur-
niture brush with upholster y nozzle into the acces-
sories holder.

After using the appliance

•

Switch off the appliance once you have inished va-
cuuming. 

Fig. 

7

Fig. 

10

 Emptying the dust container

In order to achieve the best possible vacuuming re-
sults, the dust container should be emptied after ever y 
use or, at the latest, when dust at one point in the dust 
container has reached the mark.
We recommend that you do not ill the dust container 
beyond the mark as this may lead to the ilter becoming 
clogged with dust.

* Depending on model

When emptying the dust container, always check how 
much dust there is in the ilter unit and, if necessar y, 
clean it as detailed in the "Filter care" instructions. 

!

 Caution: 

The ilter can only be cleaned if the appli-

ance is

switched off.

Never vacuum-clean without the ilter unit in place.

Fig. 

11 

•

Use the release button to release the dust container, 
and remove the dust container from the appliance.

Fig. 

12

•

Take the ilter unit out of the dust container

•

Empty the dust container.

Fig. 

13

•

Remove any dirt that may have been lodged under-
neath the container ejector opening.

•

Insert the ilter unit into the dust container, making 
sure it is correctly seated.

•

Insert the dust container into the appliance, so that 
it clicks audibly into place.

!

 Caution: 

If you notice any resistance when inserting 

the dust container, check that the ilter is complete 
and that the ilter unit and dust container are correct-
ly seated. 

Filter care

The ilters should be cleaned at regular inter vals in or-
der to ensure that the vacuum cleaner operates opti-
mally.

•

Please switch off the appliance to clean the ilters.

!

  Caution: The ilter can only be cleaned if the appli-

ance is switched off.

•

Remove the dust container from the appliance.  

Fig. 

11

•

Take the ilter unit out of the dust container. 

Fig

. 

12

Fig. 

14 

 Cleaning the plate ilter

•

To clean the plate ilter, turn the knob at least three 
turns through 180°. 

•

Then remove the plate ilter from the outer ilter unit 
and empty the dirt.

We recommend that you clean the plate ilter each time 
you empty the dust container. 

Fig. 

15

 Tapping the dirt out of the plate ilter

If the plate ilter is particularly dirty, the dirt can also 
be tapped out.

•

To do this, remove the plate ilter from the outer il-
ter unit and tap it out over a dustbin.

•

Once you have cleaned the plate ilter, it is ready for 
use immediately.

!

  Please note: The ilter does not need to be rinsed 

out.