Bort BSS-1530-Premium - Инструкция по эксплуатации - Страница 8

8

– toner dust from printers and copiers .

•  Keep suction away from your head when using the 

handle, nozzles or pipe . => Risk of injury .

•  Stand the appliance on a firm, secure surface when 

vacuuming .

•  When vacuuming stairs, the appliance must always be 

lower down than you .

•  In the following cases, stop using the appliance 

immediately and contact the after-sales service:

– if the mains connection cable is damaged .

–  if you have accidentally vacuumed up some liquid or 

liquid has entered the inside of the appliance

– if the appliance has been dropped .

•  Do not use the power cord to carry the vacuum cleaner .

•  Fully extend the power cord when using the vacuum 

cleaner continuously for several hours .

•  When disconnecting the appliance from the mains, pull 

on the plug, not the power cord .

•  Do not pull the power cord around sharp corners or allow 

it to become trapped .

•  Unplug the power cord from the mains before carrying 

out any work on the vacuum cleaner or its accessories .

•  Do not use the vacuum cleaner if it is damaged . Unplug 

the power cord from the mains if a fault is detected .

•  For safety reasons, only authorised after-sales service 

personnel are permitted to carry out repairs and fit 

replacement parts to the vacuum cleaner .

•  Protect the vacuum cleaner from outside weather 

conditions, moisture and sources of heat .

•  The vacuum cleaner is not suitable for use on building 

sites .

=> Vacuuming up building rubble could damage the ap-

pliance .

•  Switch off the appliance when it is not in use .

•  At the end of its life, the appliance should be rendered 

unusable, then disposed of in an appropriate manner .

•  Plastic bags and films must be kept out of the reach of 

children before disposal (risk of suffocation) .

•  Do not pour any flammable substances or substances 

containing alcohol onto the filters (filter bag, motor 

protective filter, exhaust filter, etc .) .

Service

Have your power tool serviced by a qualified repair person 

using only identical replacement parts . This will ensure that 

the safety of the power tool is maintained .

MAINTENANCE AND CLEANING

Make sure that the machine is not live when carrying 

out maintenance work on the motor .

•  Regularly clean the machine housing with a soft cloth, 

preferably after each use . Keep the ventilation slots free 

from dust and dirt .If the dirt does not come off use a soft 

cloth moistened with soapy water . Never use solvents 

such as petrol, alcohol, ammonia water, etc . These sol-

vents may damage the plastic parts .

•  The machine requires no additional lubrication .

•  Should a fault occur, e .g . after wear of a part, please con-

tact your local BORT GLOBAL LIMITED dealer .

DISPOSAL

Discarded electric appliances are recyclable and 

should not be discarded in the domestic waste! 

Please actively support us in conserving resources and pro-

tecting the environment by returning this appliance to the 

collection centres (if available) .

In order to prevent the machine from damage during 

transport, it is delivered in a sturdy packaging . Most of the 

packaging materials can be recycled . Take these materials 

to the appropriate recycling locations . Take your unwanted 

machines to your local BORT GLOBAL LIMITED dealer . Here 

they will be disposed of in an environmentally safe way .

Noise/Vibration Information

Measured in accordance with EN 60745-2-11 the sound 

pressure level of this tool is 70 dB(A) and the sound power 

level is 78 dB(A) (standard deviation: 3 dB), and the vibra-

tion is 3,7 m/s

2

 (hand-arm method) .

Declaration of Conformity  

We declare under our sole responsibility that this product is 

in conformity with the following standards or standardized 

documents: EN60335-1, EN60335-2-2, EN62233, EN55014-

1, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, 

EN62301, in accordance with the regulations 2014/35/EU, 

2014/30/EU, 2009/125/EC .