JVC KD-G807 - Инструкция по эксплуатации - Страница 11

11

ENGLISH

2

Press and hold 

¢

 or 

4

until “M” (manual) starts flashing on
the display.

3

Tune in to a station you want while
“M” (manual) is still flashing.

• If you release your finger from the button,

the manual mode will automatically turns
off after 5 seconds.

• If you hold down the button, the frequency

keeps changing—in 50 kHz intervals
(87.5 MHz – 108.0 MHz for FM 1 and
FM 2), in 30 kHz intervals (65.00 MHz –
74.00 MHz for FM 3) and 9 kHz for AM
—MW/LW until you release the button.

To tune in to stations of
higher frequencies

To tune in to stations of lower frequencies

When an FM stereo broadcast is hard to
receive:

1

Press MODE to enter the
functions mode while listening
to an FM stereo broadcast.

2

Press MO (monaural), while
“MODE” is still on the display, so
that “MONO” appears on the
display.
Each time you press the button,
the monaural mode turns on
and off alternately.

When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).

1

Select the FM band (FM1 – 3) you
want to store FM stations into.

Each time you press the
button, the band changes as
follows:

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M 

(A1)

CONTINUED ON THE NEXT PAGE

MO (monaural) indicator