Проигрыватели Elenberg DVDP-2410 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Button
Description
OPEN/
CLOSE
Press OPEN/CLOSE button when power on, the disc tray is
pushed out. Put the disc on the tray with the title faced up.
Press OPEN/CLOSE again to close the disc tray and the unit
starts playing automatically. (Without auto-play function for
MP3 and JPEG discs)
STANDBY
When playing, press STANDBY button, the machine will be
power-off and go to standby state; Press STANDBY again, the
machine will be power-on and start playing.
Warning: The power is not fully cutoff at standby state. If the
machine will not be used for a long time, turn off the power by
pressing the POWER button on the front panel.
TITLE
When playing MP3 disc, press [TITLE] button to transform be-
tween the folder and track playing; when playing DVD disc,
press [TITLE] button return to play the title contents.
MENU
When playing DVD disc, press MENU once to return to sub-
menu. Press MENU again to return to the main menu.
V-MODE
Press V-MODE button to switch the video output mode (YUV-
RGB-VGA, etc.)
PBC
When playing VCD disc, press PBC button turn on PBC, the VCD
is played by menu, press PBC button again turn off PBC, then
VCD is played in sequence.
AUDIO
When playing DVD with more than one audio stream, press
AUDIO to select you desired.
SUBTITLE
When playing the DVD disc with multi-subtitle, press SUBTITLE
continually, the subtitle changes in a circle, you can select one
supported by the disc.
ANGLE
When playing the DVD disc with multi-angle, it’s convenient to
change the view angle
L/R/ST
When playing super VCD, VCD disc press L/R/ST button to se-
lect left channel/right channel/stereo/mix audio output
1-10,+10
When playing VCD 1.1, CD, MP3 disc, after loading the disc,
use the digit key to select the desired track or chapter directly.
Press 10+ key and then another digit key to select the track
which number is 10 or more than 10.
You can press digit keys at MENU selection.
When playing DVD, SVCD, VCD, CD disc, press STOP once, the
unit will memorize the previous ending point. Press PLAY but-
ton to go on the play. Press STOP for the second time to stop
the play and end memory.
When playing the disc, press PAUSE once to pause, press PAUSE
again to return to normal play.
34
