Kuppersbusch IG 4407.0 GE - Инструкция по эксплуатации - Страница 14

User instructions 

13 

"3/1" OPTION BUTTON 

(available in all programs except the soak program) 

By pressing the button 

(8)

 you activate the "

3/1

" option, confirmed when 

the relative light comes on. This option has been studied for the use of  
dishwashing powder or tablets with integrated substances in place of  
regenerating salt or rinse-aid known on the market as “3 in 1” or “triple 
action” products; in this case the dishwasher will use the product in an 
optimal way avoiding salt and rinse-aid consumption, which could 
already be found in the dishwasher. 

Note:

  When selecting the "

3/1

" button, it is normal that the salt and 

rinse-aid lights remain on, if their containers are empty. 

IMPORTANT:

 when no longer required, the option must be 

disabled 

by 

pressing the relative

 button

 (the light goes out). 

If the water hardness has been set on a value above H3, and the 3/1 
option is activated, the “3/1” OPTION 

LIGHT

 (9) flashes, warning of a 

setting error, because these products are not suitable for use with very 
hard water. This does not prevent the use of the option, but the washing 
results might not be of the best.

STARTING THE DISHWASHER 

After carrying out all theoperations described above correctly, to start the 
dishwasher simply press the 

START/PAUSE

 button 

(4)

 for a few 

seconds until a beep sounds (the 

PROGRAM STARTED (5)

 light start to 

flash). The 

3-FIGURE DISPLAY (10)

 will show the duration of the 

program in minutes. The duration time is only approximate, because it 
depends on the washing conditions (quantity of dishes, water 
temperature, etc.), and is also continually updated as the washing 
program progresses. 

The  3-FIGURE DISPLAY (10) shows the estimated duration of the 
washing program.