Kuppersbusch IG 4407.0 GE - Инструкция по эксплуатации - Страница 15

User instructions 

14

If it is necessary to open dishwasher door during the washing cycle, 
there will be a 1-minute delay before the program can be resumed. After 
correctly closing the door, press the START/PAUSE (4) button again. 
This operation may negatively affective the progress of the washing 
cycle. 

END PROGRAM 

The end of the program is indicated by a short signal acoustic and from 
the 

“End”

 visual notification on the 

3-FIGURE DISPLAY (10).

By pressing the 

PROGRAM SELECTION

 button 

(2)

, the 

“End”

 visual 

signal will vanish from the display and the dishwasher is ready to 
continue a new cycle, the same thing happens when closing or opening 
the door or by switching on-off the machine. 

TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT 

•

Always try to run the dishwasher fully loaded. 

•

Do not wash the dishes in running water. 

•

Use the washing program that is most appropriate for each type of 
load. 

•

Do not carry out any preliminary rinsing. 

•

If available, connect the dishwasher to a hot water supply up to 
60°C. 

 
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT 
THE ENVIRONMENT 

The phosphates contained in dishwasher detergents are harmful to the 
environment. To avoid using excessive amounts of detergent and to 
save on electricity, observe the following: 

•

separate  the more delicate items from dishes that are more 
resistant to aggressive detergents and high temperatures; 

•

do not pour  the detergent directly on the dishes. 

REMOVING THE DISHES 

At the end of the washing program, wait at least 

20 minutes 

before 

removing the dishes, to allow them to cool down. To prevent any water 
droplets on the upper basket from falling on the dishes in the lower 
basket, it is 

advisable 

to unload the lower basket first, and then the 

upper basket.