KRAFT TCH-DM454D901SBI - Инструкция по эксплуатации - Страница 52

ВСТРАИВАЕМАЯ ПОСУДОМОЕЧНАЯ МАШИНА

BUILT-IN DISHWASHER

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

52

order of the disassembly, replace the filter insert, and rotate clockwise to the close arrow.

WARNING!

•  Do not over tighten the filters. Put the filters back in sequence securely, otherwise coarse 

debris could get into the system and cause a blockage.

•  Never use the dishwasher without filters in place. Improper replacement of the filter may 

reduce the performance level of the appliance and damage dishes and utensils.

Spray arms 

It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm 

jets and bearings. To clean the spray arms, follow the instructions below:

Frost precaution

Please take frost protection measures on the dishwasher in winter. Every time after washing 
cycles, please operate as follows:
    1. Cut off the electrical power to the dishwasher at the supply source.
    2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
    3. Drain the water from the inlet pipe and water valve (use a pan to gather the water).
    4. Reconnect the water inlet pipe to the water valve.
    5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

After every wash

After every wash, turn off the water supply to the appliance and leave the door slightly open so that 
moisture and odors are not trapped inside.
Before cleaning or performing maintenance, always remove the plug from the socket. To clean the 
exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Only 
use a cloth with warm soapy water. To remove spots or stains from the surface of the interior, use a 
cloth dampened with water a little vinegar, or a cleaning product made specifically for dishwashers.

When not in use for a longtime

It is recommended that you run a wash cycle with the dishwasher empty and then remove the plug 
from the socket, turn off the water supply and leave the door of the appliance slightly open. This will 
help the door seals to last longer and prevent odors from forming within the appliance.

Moving the appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can 
be positioned on its back.