Посудомоечные машины Elenberg DW-9325 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
54
Steam
Normal phenomenon
There is some steam coming through
the vent by the door latch during dry-
ing and water draining.
Black or gray
marks on
dishes
Aluminum
utensils
have
rubbed against dishes
Use a mild abrasive cleaner to elimi-
nate those marks.
Water
standing in
the bottom
of the tub
This is normal
A small amount of clean water around
the outlet on the tub bottom at the
back of the tub keeps the water seal
lubricated.
Dishwasher
leaks
Overfill dispenser or rinse
aid spills
Be careful not to overfill the rinse aid
dispenser.
Spilled rinse aid could cause overus-
ing and lead
to overflowing. Wipe away any spills
with a damp cloth.
Dishwasher isn’t level
Make sure the dishwasher is level.
CODES MEANING
POSSIBLE CAUSES
E1
Long inlet time
Faucets is not opened
E2
Longer draining time The installation position of the
drain pipe is too high
E3
Longer heating time,
but not reached re-
quired temperature
Malfanction of temperature sensir
or of heating element.
E4
Overfilled
Too much inlet water.
E5
Failure of tempera-
ture sensor
Open or short circuit or break of
temperature sensor
WARNING
If overflow occors, turn off the main water supply before calling
a service. If there is water in the base pan because of an overfill
or small leak, the water should be removed before restarting the
dishwasher.
ERROR CODES
