Electrolux ESL 5201LO - Инструкция по эксплуатации - Страница 9

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l

Clarke de‐

grees

Water softener

level

<4

<7

<0.7

< 5

1 

2)

1) Factory setting.

2) Do not use salt at this level.

Whether you use a standard detergent

or multi-tabs (with or without salt), set

the proper water hardness level to

keep the salt refill indicator active.

Multi-tabs containing salt are

not effective enough to

soften hard water.

How to set the water softener

level

The appliance must be in programme

selection mode.
1. To enter the user mode, press and

hold the programme button until the
indicator 

 starts to flash and

the indicator 

 comes on with

fixed light.

2. Wait until the indicator 

 goes off

and the indicator 

 starts to flash.

The indicator 

 continues to

flash. The intermittent flashing of the
indicator 

 refers to the current set

level.

• E.g. 5 flashes + pause + 5 flashes

= level5.

3. Press programme button repeatedly

to change the setting. Each time you

press programme button the level

number increases. After level 10 you

will start again from level 1.

4. Press the on/off button to confirm the

setting.

6.3 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.
There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic signal

is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

The appliance must be in programme

selection mode.
1. To enter the user mode, press and

hold the programme button until the
indicator 

 starts to flash and

the indicator 

 comes on with

fixed light.

2. Press immediately the programme

button.

• The indicator 

 comes on

with fixed light.

• The indicator 

 starts to flash.

3. Wait until the indicator 

 goes

off. The indicator 

 continues to

flash.

• The end indicator indicates the

current setting: End indicator off =

Acoustic signal off.

4. Press the programme button to

change the setting.

• End indicator on = Acoustic signal

on.

5. Press the on/off button confirm the

setting.

ENGLISH

9