Electrolux ESL 5201LO - Инструкция по эксплуатации - Страница 17

Problem and alarm code

Possible cause and solution

Rattling/knocking sounds from in‐

side the appliance.

• The tableware is not properly arranged in

the baskets. Refer to basket loading leaflet.

• Make sure that the spray arms can rotate

freely.

The appliance trips the circuit-beak‐

er.

• The amperage is insufficient to supply si‐

multaneously all the appliances in use.

Check the socket amperage and the capaci‐

ty of the meter or turn off one of the applian‐

ces in use.

• Internal electrical fault of the appliance.

Contact an Authorised Service Centre.

Refer to "Before first use", 

"Daily use", or "Hints and

tips" for other possible

causes.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.
For alarm codes not described in the

table, contact an Authorised Service

Centre.

11.1 The washing and drying results are not satisfactory

Problem

Possible cause and solution

Poor washing results.

• Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

Poor drying results.

• Tableware has been left for too long inside a

closed appliance.

• There is no rinse aid or the dosage of rinse aid is

not enough. Set the rinse aid dispenser to a higher

level.

• Plastic items may need to be towel dried.

• We recommend to always use rinse aid, even in

combination with multi-tablets.

There are whitish streaks or

bluish layers on glasses and

dishes.

• The release quantity of rinse aid is too much. Ad‐

just the rinse aid level to a lower level.

• The quantity of detergent is too much.

There are stains and dry wa‐

ter drops on glasses and

dishes.

• The released quantity of rinse aid is not sufficient.

Adjust the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

ENGLISH

17