Bort BWS-1405-R - Инструкция по эксплуатации - Страница 8

8

•  When operating a power tool outdoors, use an extension 

cord suitable for outdoor use . Use of a cord suitable for 

outdoor use reduces the risk of electric shock .

•  If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected sup-

ply . Use of an RCD reduces the risk of electric shock .

Personal safety

•  Stay alert, watch what you are doing and use common 

sense when operating a power tool . Do not use a power 

tool while you are tired or under the influence of drugs, 

alcohol or medication . A moment of inattention while 

operating power tools may result in serious personal 

injury .

•  Use personal protective equipment . Always wear eye 

protection . Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal 

injuries .

•  Prevent unintentional starting . Ensure the switch is in 

the off-position before connecting to power source and/

or battery pack, picking up or carrying the tool . Carrying 

power tools with your finger on the switch or energising 

power tools that have the switch on invites accidents .

•  Remove any adjusting key or wrench before turning the 

power tool on . A wrench or a key left attached to a rotat-

ing part of the power tool may result in personal injury .

•  Do not overreach . Keep proper footing and balance at 

all times . This enables better control of the power tool in 

unexpected situations .

•  Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from mov-

ing parts . Loose clothes, jewellery or long hair can be 

caught in moving parts .

•  If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 

and properly used . Use of dust collection can reduce 

dust-related hazards .

Power tool use and care

•  Do not force the power tool . Use the correct power 

tool for your application . The correct power tool will 

do the job better and safer at the rate for which it was 

designed .

•  Do not use the power tool if the switch does not turn 

it on and off . Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired .

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools . Such preventive safety measures reduce the risk of 

starting the power tool accidentally .

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 

or these instructions to operate the power tool . Power 

tools are dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation . If 

damaged, have the power tool repaired before use . Many 

accidents are caused by poorly maintained power tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in 

accordance with these instructions, taking into account 

the working conditions and the work to be performed . 

Use of the power tool for operations different from 

those intended could result in a hazardous situation .

Service

Have your power tool serviced by a qualified repair person 

using only identical replacement parts . This will ensure 

that the safety of the power tool is maintained .

SAFETY WARNINGS FOR POLISHERS

•  This power tool is intended to function as a sander, wire 

brush and polisher . Read all safety warnings, instruc-

tions, illustrations and specifications provided with 

this power tool . Failure the follow all instructions listed 

below may result in electric shock, fire and/or serious 

injury .

•  Operations such as grinding or cutting-off are not rec-

ommended to be performed with this power tool . Op-

erations for which the power tool was not designed may 

create a hazard and cause personal injury .

•  Do not use accessories which are not specifically de-

signed and recommended by the tool manufacturer . 

Just because the accessory can be attached to your 

power tool, it does not assure safe operation .

•  The rated speed of the accessory must be at least equal 

to the maximum speed marked on the power tool . 

Accessories running faster than their rated speed can 

break and fly apart .

•  The outside diameter and the thickness of your acces-

sory must be within the capacity rating of your power 

tool . Incorrectly sized accessories cannot be adequately 

guarded or controlled .

•  Threaded mounting of accessories must match the 

grinder spindle thread . For accessories mounted by 

flanges, the arbour hole of the accessory must fit the 

locating diameter of the flange . Accessories that do not 

match the mounting hardware of the power tool will run 

out of balance, vibrate excessively and may cause loss 

of control .

•  Do not use a damaged accessory . Before each use in-

spect the accessory such as abrasive wheels for chips 

and cracks, backing pad for cracks, tear or excess wear, 

wire brush for loose or cracked wires . If power tool or 

accessory is dropped, inspect for damage or install an 

undamaged accessory . After inspecting and installing an 

accessory, position yourself and bystanders away from 

the plane of the rotating accessory and run the power 

tool at maximum no-load speed for one minute . Dam-

aged accessories will normally break apart during this 

test time .

•  Wear personal protective equipment . Depending on 

application, use face shield, safety goggles or safety 

glasses . As appropriate, wear dust mask, hearing protec-

tors, gloves and shop apron capable of stopping small 

abrasive or workpiece fragments . The eye protection 

must be capable of stopping flying debris generated by 

various operations . The dust mask or respirator must be 

capable of filtrating particles generated by your opera-