Simfer F66GH42117 - Инструкция по эксплуатации - Страница 10

10

5. 

If the power supply cord (the cord with plug) is 

damaged, this cord shall be replaced by the manufacturer 

or its service agent or an equally qualified personnel to 

prevent a hazardous situation.

6. 

Never wash the product by spraying or pouring water 

on it! There is a risk of electrocution.

7. WARNING: To avoid electric shock, ensure that the 

device circuit is open before changing the lamp.

8. WARNING: Cut off all supply circuit connections before 

accessing the terminals.

9. WARNING: If the surface is cracked, turn off the appliance 

to avoid risk of electric shock.

10. 

Do not use cut or damaged cords or extension 

cords other than the original cord.

11. 

Make sure that there is no liquid or humidity in 

the outlet where the product plug is installed.

12. 

The rear surface of the oven also heats up when 

the oven is operated. Electrical connections shall not 
touch the rear surface, otherwise the connections may 
be damaged.

13. 

Do not tighten the connecting cables to the oven 

door and do not run them over hot surfaces. If the cord 
melts, this may cause the oven to short circuit and 

even a fire.

14. 

Unplug the unit during installation, maintenance, 

cleaning and repair.

GB