MG ZBM 3399 BOR - Инструкция по эксплуатации - Страница 56

56

GB

Setting The Key Lock 

If you activate the key lock, the timer can no longer be operated 
with regard to time and programme. Neither the time of day nor 
an elapsing minute minder nor an active cooking programme can 
be modified. However, the set functions will operate accurately. 
Proceed as follows to activate the key lock: 
Simultaneously press the minus and plus button for approx. 
3 seconds. On the display, the “

” indicator for key lock is 

illuminated. Merely the signalling of the end of the time after 
the end of a cooking programme can be terminated by pressing 
any button. All other functions cannot be operated. Proceed as 
follows to deactivate the key lock: 
Simultaneously press the minus and plus button for approx. 
3 seconds. On the display, the “

” indicator for key lock is 

extinguished. 

Special Function of the Timer – Automatic Cut off 

If the oven selector switch is not in zero position, i.e. if the 
connected appliance is switched on and if the timer is not 
operated for a period of three hours, the timer switches off the 
connected appliance. This has the advantage that an overheating 
in the connected appliance cannot occur. In the event of an 
automatic cut off, the “

” indicator for automatic cut off flashes 

on the display. 
Proceed as follows to deactivate the automatic cut off: 
1. Return the oven selector switch to zero position. 

Press the mode button until the “

” indicator for operation end 

flashes. The current time of day is displayed on the display. 

Note:

 If you do not make an input in the next 5 seconds, the timer 

returns to the currently active operation period programme. 
Starting from the current time of day, use the plus button to set 
the desired end in steps of 1 minute. 

The “

” indicator for operation end remains illuminated until 

the baking process starts. This occurs at the time “operation end 
minus operation period”. At this moment, the timer changes to 
operation period mode. The “

” indicator for operation end is 

extinguished, the “

” indicator for operation period is illuminated 

and the remaining operation period is displayed instead. 
The running programme can also be called with the mode button 
while it is active. This enables to check and possibly correct the 
set data using the set buttons. To avoid errors, it is not possible to 
reset the time of day while a programme is active. 
After the set time has elapsed, a signal sounds (

.... ....

) (i.e. a 

pause follows after four signals). The oven swiches of. On the 
display, the “

” indicator for operation period flashes and the 

time “0:00” is displayed. The signal ends automatically after 
approx. 1  minute while the “

” indicator continues to flash. 

Press any button to exit the current mode. 

You can also manually stop the signal indicating of the end of the 
time by pressing any button or move the oven selector switch to 
the zero position.