Smeg CX60ISVT9 - Инструкция по эксплуатации - Страница 21

Use

71

EN

Cooking zone automatic switch-off timer

1. If the cooking zone is not selected, press 

keys 

 and 

 at the same time, 

 will appear on the display.

2. Press keys 

 and 

 again; if at least 

one cooking zone is active, one flashing 
dot will light up to indicate that the zone 
is being timed.

3. Select the automatic switch-off time using 

the 

 and 

 keys (hold the keys 

down to set the time more quickly), or 

select an additional zone using keys 

and .

4. Press keys 

 and 

 at the same time 

until a lighted dot appears under the 
display of the zone whose set time you 
wish to change. Once the relevant zone 

is selected, use keys 

 and 

 to 

change the previously selected time.

5. At the end of the previously set time, the 

hob will deactivate the cooking zone 
and warn the user with a series of 
buzzers. Press any key to stop the 
buzzer.

Control lock

After activating the hob:

1. Press keys 

 and 

 at the same 

time.

2. Press the 

 button after the beep.

The controls are now locked and 

 will 

appear on the display.

To unlock the controls:

1. Press keys 

 and 

 at the same 

time. 

2. Press the 

 button after the beep.

Power control

The hob is fitted with a power control 
module that optimises/limits consumption. If 
the overall set power levels exceed the 
maximum limits permitted, the electronic 
circuit board controls automatically the 
power supplied by the hot plates.
The module tries to maintain the maximum 
deliverable power levels. Levels set by the 
automatic control will appear on the 
display.
The flashing of a power level indicates that 
it will be automatically limited to a new level 
selected by the power control module.

This function is used to program the 
automatic switch-off of each 
cooking zone at the end of a 
period of time (from 1 to 99 
minutes).

If the timer is activated without an 
active cooking zone it behaves like 
an ordinary minute minder.

In case of a power failure the 
control lock will be deactivated.

Priority is given to the last zone set.

The power control module does 
not affect the total power 
consumption of the appliance.