Smeg B901GMXI9 - Инструкция по эксплуатации - Страница 28

Cleaning and maintenance

76

Vapor Clean cycle setting

1. Turn the function knob to the symbol 

 and the temperature knob to the 

symbol .

2. Set a cooking time of 18 minutes using 

the programmer clock.

The Vapor Clean cycle starts a few seconds 
after the last press on the programmer clock 
keys.
3. At the end of the Vapor Clean cycle, 

the timer will deactivate the oven 
heating elements, the buzzer will start to 
sound and the numbers on the 
programmer clock dial will flash.

End of the Vapor Clean cycle

4. Open the door and wipe away the less 

stubborn dirt with a microfibre cloth.

5. Use a non-scratch sponge with brass 

filaments on hard to remove deposits.

6. In case of grease residues use specific 

oven cleaning products.

7. Remove the water left inside the oven.

For improved hygiene and to avoid food 
being affected by any unpleasant odours, 
we recommend that the oven is dried using 
a fan assisted function at 160 °C for 
approximately 10 minutes.

4.5 Extraordinary maintenance

Replacing the internal light bulb

1. Completely remove all accessories 

from inside the oven.

2. Remove the rack/tray support frames.

3. Remove the bulb cover using a tool 

(e.g. a screwdriver).

We recommend wearing rubber 
gloves for these operations.

For easier manual cleaning of 
parts that are difficult to reach, we 
recommend removing the door.

Live parts

Danger of electrocution

• Unplug the appliance from the mains.

The oven is fitted with a 40W light 
bulb.

Take care not to scratch the 
enamel of the oven cavity wall.