Smeg A2BL-8 - Инструкция по эксплуатации - Страница 37

Instructions for the user

89

Refer to the following diagram for setting the cleaning cycle duration:

CLEANING
DURATION

LIGHT DIRT

MEDIUM DIRT

HEAVY DIRT

90 MIN.

165 MIN.

210 MIN.

During the automatic cleaning cycle, the fans produce a more intense level of
noise due to a greater rotation speed; this is entirely normal and intended to
facilitate heat dissipation.
At the end of pyrolysis, the fans will continue to operate for long enough to avoid
overheating the walls of adjacent units and the front of the oven.

9.9.2 Setting the cleaning cycle

Turn the function selection knob to 

 to select the cleaning cycle.

Press and hold 

; press 

 or 

 to set the duration of the cycle. The setting

varies between a minimum of 1h 30m and a maximum of 3h 30m.

Two minutes after the cleaning cycle (Pyrolysis) starts, a door
locking device will be tripped, preventing the door being opened.
The appropriate light will switch on to indicate that the locking
device has been activated.

At the end of the cleaning cycle the door locking device will remain active until
the temperature inside the oven has reached a safety threshold. When the oven
has cooled down, collect the residues from automatic cleaning with a damp
microfibre cloth.

To select a cleaning cycle with a delayed start, after setting the duration press

. The time when the cleaning cycle will terminate will appear on the display.

Press and hold 

, and press 

 or 

 to set the time at which you wish to

terminate the cleaning cycle.

It is not possible to select any functions once the door locking device has been

activated. Wait for 

 to go out.