Smeg A2BL-8 - Инструкция по эксплуатации - Страница 19

Instructions for the user

71

7.8

Analogue clock operation

7.8.1 Setting the time

When the oven is used for the first time, or after an interruption in the electricity

supply, the display flashes at regular intervals. Press the key 

 to stop the

display flashing. Press key 

 again for 2 seconds; the current time can now be

set. Press the value modification keys 

 or 

 to increase or decrease the

setting by one minute for each pressure.
Press either of the value modification keys to display the current time. Five
seconds after last pressing the key, the clock will start from the set time.

7.8.2 Timer

This function only activates the buzzer, without
stopping cooking. 

•  Press 

 and the display will light up as

shown in figure 1;

•  Within 5 seconds press key 

 or 

 to

set the timer. Each time a key is pressed, an
outer segment representing 1 minute of
cooking is lit or switched off (figure 2 shows
1 hour and 10 minutes).

•  Five seconds after last pressing the key the

countdown begins, at the end of which the
buzzer activates.

•  The current time can be viewed during the

countdown by pressing key 

 once, press

the key again to return to the timer display.

1) 

  2) 

At the end of the countdown, the oven must be switched off manually by turning
the thermostat and function selector knob to 0.

It is not possible to set a cooking time of more than 4 hours.