Kaiser HGE 52508 KB - Инструкция по эксплуатации - Страница 24

24 

 EN 

GAS COOKING ZONES CONTROL 

 
 
Before using your new appliance, we ask you to do 
the following: 

x

  Read carefully the operating instructions and 

safity conditions. 

x

  Remove the packaging, empty the drawer, 

clean the oven cavity in order to eliminate 
preservative agents. 

x

  Check up functional efficiency of the stop 

valves (installation junction and that of the 
cooker) as well as the other control units. 

x

  Heat up the oven (at 250° C for 30 min.) 

x

  Service the cooker only in case of duly 

ventilation. 

 
 
 
 
The cooking zones control is achieved by means 
of knobs 

1, 2, 3 and 4 

set up on the control panel 

of the cooker

.  

All gas cookers XL 500 are provided with the 
system of electrical ignition operated by means of 
knobs. 
 
To switch on a gas burner: 

x

  Press the corresponding knob of the selected 

burner against the stop and turn it to the left up 
to the position 

strong gas supply

. 

x

  Keep the switch pressed till the burner ignites. 

x

  After the burner has ignited, let the knob go 

and select the required flame volume (e.g. 

sparing flame

). 

x

  To switch off the burner after the food is ready 

turn on the knob to the right (position “off”). 

If your appliance is provided with gas control 
system for the burners and the oven, to ignite a 
burner press the knob against the stop and 
keep it in the position “strong gas supply” to 
activate the control system. 

Attention! 

It is not allowed to adjust gas 

supply between the position

 burner off

and the position 

strong gas supply

1

2

3

4

1

2

3

4