Metabo KS 55 FS (600955700) - Инструкция по эксплуатации - Страница 12

ENGLISH

en

12

off the cut width on the marking (15). Tighten the 

locking screw (16). It is best to calculate the exact 

cut width by making a test cut.

Sawing with a guide rail (for KS 55 FS only):

 This can be used to make straight-line, tear-free cut 

edges that are millimetre-precise. The anti-slip 

coating keeps the surface safe and protects the 

workpiece against scratches.

Clean the machine regularly.

 This includes 

vacuum cleaning the ventilation louvres on the 

motor. Use compressed air to clean the movable 

safety guard (24) regularly (wear safety glasses 

when doing so). The guard must move freely, auto-

matically, easily and exactly back into its end posi-

tion.

Changing saw blades

Pull the plug out of the plug socket before 

carrying out any adjustments or servicing.

Press in the spindle locking button (20) and hold in 

place. Turn the saw spindle slowly with the spanner 

in the saw blade fixing screw (21) until the lock 

catches.
Remove the saw blade fixing screw (21) by turning 

it in counter-clockwise direction.
Pull back the movable safety guard (24)using the 

lever (10) and remove the saw blade. (23)
The contact areas between the inner saw blade 

flange (25), saw blade (23), outer saw blade flange 

(22) and saw blade fixing screw (21) must be free of 

dust. 
Insert a new saw blade, making sure the direction of 

rotation is correct. The direction of rotation is indi-

cated by arrows on the saw blade and safety guard.

Tighten the saw blade fixing screw (21).

Only use sharp, undamaged saw blades. Do 

not use any cracked saw blades or blades that 

have changed their shape.

Do not use any saw blades made from high-

alloy high-speed steel (HSS).
Do not use any saw blades which do not 

conform to the specified rating.
The saw blade must be suitable for the no-load 

speed.
Use a saw blade that is suitable for the mate-

rial being sawn.
Saw blades intended for cutting wood or 

similar materials have to conform to 

EN 847-1.

Use only genuine Metabo accessories. 
Use only accessories that fulfil the requirements 

and specifications listed in these operating instruc-

tions.
For a complete range of accessories, see 

www.metabo.com or the main catalogue.

Repairs to electrical tools must be carried out 

by qualified electricians ONLY! 

A defective mains cable must only be replaced with 

a special, original mains cable from metabo, which 

is available only from the Metabo service.
If you have Metabo electrical tools that require 

repairs, please contact your Metabo service centre. 

For addresses see www.metabo.com.
You can download spare parts lists from 

www.metabo.com.

To protect the environment, do not dispose of 

power tools or battery packs in household 

waste. Observe national regulations on 

separated collection and recycling of disused 

machines, packaging and accessories.

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.

P

1

= Rated  input

P

2

= Power output

n

0

= No-load speed

n

1

= On-load speed

T

90°

= max. depth of cut (90°)

T

45°

= max. depth of cut (45°)

A

= Adjustable diagonal cut angle

D

= Saw blade diameter

d

= Saw blade drill diameter

a

= Max. base body thickness of saw blade

b

= Cutting width of saw blade

m

= Weight

Measured values determined in conformity with 

EN 62841.

Machine in protection class II

~

Alternating current

The technical specifications quoted are subject to 

tolerances (in compliance with the relevant valid 

standards).

Emission values

Using these values, you can estimate the 

emissions from this power tool and compare these 

with the values emitted by other power tools. The 

actual values may be higher or lower, depending on 

the particular application and the condition of the 

tool or power tool. In estimating the values, you 

should also include work breaks and periods of low 

use. Based on the estimated emission values, 

specify protective measures for the user - for 

example, any organisational steps that must be put 

in place. 
Vibration total value (vector sum of three directions) 

determined in accordance with EN 62841:

a

h, D

= Vibration emission value 

(Sawing chip board)

K

h,D

= Uncertainty (vibration)

8. Maintenance

9. Accessories

10. Repairs

11. Environmental Protection

12. Technical specifications