Makita HS6101 - Инструкция по эксплуатации - Страница 5

5 

Work mode : cutting metal 
Vibration emission (a

h,M

) : 2.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

Model HS7100,HS7101 

Work mode : cutting wood 
Vibration emission (a

h,W

) : 2.5 m/s

2

 or less 

Uncertainty (K) : 1.5 m/s

2 

Work mode : cutting metal 
Vibration emission (a

h,M

) : 2.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

ENG901-1 

• 

The declared vibration emission value has been 
measured in accordance with the standard test 
method and may be used for comparing one tool 
with another. 

• 

The declared vibration emission value may also be 
used in a preliminary assessment of exposure. 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-15 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   
Circular Saw 
Model No./ Type: HS6100, HS6101, HS7100, HS7101,   
are of series production and 

Conforms to the following European Directives: 

2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd. 
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England 
 

6.6.2011

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB013-6 

CIRCULAR SAW SAFETY 
WARNINGS 

Cutting procedures 

1. 

DANGER: Keep hands away from cutting 

area and the blade. Keep your second hand on 
auxiliary handle, or motor housing.

 If both 

hands are holding the saw, they cannot be cut by 
the blade. 

2. 

Do not reach underneath the workpiece.

 The 

guard cannot protect you from the blade below the 
workpiece. 

3. 

Adjust the cutting depth to the thickness of 
the workpiece.

 Less than a full tooth of the blade 

teeth should be visible below the workpiece. 

4. 

Never hold piece being cut in your hands or 
across your leg. Secure the workpiece to a 
stable platform.

 It is important to support the work 

properly to minimize body exposure, blade binding, 
or loss of control. 

A typical illustration of proper hand support, workpiece 
support, and supply cord routing (if applicable).

000157 

5. 

Hold the power tool by insulated gripping 
surfaces only, when performing an operation