Makita HS6100 - Инструкция по эксплуатации - Страница 10

10 

Both carbon brushes should be replaced at the same 
time. Use only identical carbon brushes. 
Use a screwdriver to remove the brush holder caps. Take 
out the worn carbon brushes, insert the new ones and 
secure the brush holder caps. 

Fig.21 

After replacing brushes, plug in the tool and break in 
brushes by running tool with no load for about 10 minutes. 
Then check the tool while running and electric brake 
operation when releasing the switch trigger. If the electric 
brake is not working correctly, have the tool repaired by a 
Makita service center. 
To maintain product SAFETY and RELIABILITY, repairs, 
any other maintenance or adjustment should be 
performed by Makita Authorized Service Centers, always 
using Makita replacement parts. 

OPTIONAL ACCESSORIES 

CAUTION: 

• 

These accessories or attachments are 
recommended for use with your Makita tool 
specified in this manual. The use of any other 
accessories or attachments might present a risk of 
injury to persons. Only use accessory or 
attachment for its stated purpose. 

If you need any assistance for more details regarding 
these accessories, ask your local Makita Service Center. 

• 

Saw blades 

• 

Rip fence (Guide rule) 

• 

Guide rail 

• 

Guide rail adaptor 

• 

Hex wrench 

• 

Joint 

NOTE: 

• 

Some items in the list may be included in the tool 
package as standard accessories. They may differ 
from country to country.