Einhell TС-CS 1200 - Инструкция по эксплуатации - Страница 18

GB

- 18 -

Danger!

 When using the equipment, a few safety pre-

cautions must be observed to avoid injuries and 

damage. Please read the complete operating 

instructions and safety regulations with due care. 

Keep this manual in a safe place, so that the in-

formation is available at all times. If you give the 

equipment to any other person, hand over these 

operating instructions and safety regulations as 

well. We cannot accept any liability for damage 

or accidents which arise due to a failure to follow 

these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be 

found in the enclosed booklet.

Warning!

Read all the safety information, instructions, 

illustrations and technical data provided on 

or with this power tool.

 Failure to adhere to the 

following instructions may result in electric shock, 

fi

 re and/or serious injury.

Keep all the safety information and instruc-

tions in a safe place for future use.

2.  Layout and items supplied

2.1 Layout (Fig. 1a/1b)

 1.    Handle

2.   ON/OFF switch

3.   Locking button for ON/OFF switch

4.   Locking lever for cutting depth setting

5.   Power cable

6.   Soleplate

7.   Locking lever for miter setting

8.   Locking screw for parallel stop

9.   Scale for miter angle

10.  Additional handle

11.  Guard hood

12.  Saw blade

13.  Saw blade wrench

14.  Connection for sawdust extractor

15.  Lever for the swing guard hood

16.  Parallel stop

17.  Screw for securing the saw blade

18.  Flange

19.  Swing guard hood

20.  Splitter

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

the latest within 5 working days after purchasing 

the product and upon presentation of a valid bill 

of purchase. Also, refer to the warranty table in 

the service information at the end of the operating 

instructions.

• 

 Open the packaging and take out the equip-

ment with care.

• 

 Remove the packaging material and any 

packaging and/or transportation braces (if 

available).

• 

 Check to see if all items are supplied.

• 

 Inspect the equipment and accessories for 

transport damage.

• 

 If possible, please keep the packaging until 

the end of the guarantee period.

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or su

ff

 ocating!

• 

 Hand-held Circular Saw

• 

 Saw  blade

• 

 Saw blade wrench

• 

Parallel stop

• 

Original operating instructions

• 

 Safety  instructions 

3. Proper use

 The hand-held circular saw is designed for sa-

wing straight cuts in wood, wood-type materials 

and plastics. When working, be careful not to 

overheat the tips of the saw blade and melt the 

plastic.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 

businesses or for equivalent purposes.

Anl_TC_CS_1200_SPK9.indb   18

Anl_TC_CS_1200_SPK9.indb   18

12.12.2019   08:43:44

12.12.2019   08:43:44