Bosch GKS 65 G - Инструкция по эксплуатации - Страница 16

16

 | English 

1 609 92A 14U | (4.2.15)

Bosch Power Tools

Intended Use

GKS 65 / GKS 65 G:

The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in 
wood while resting firmly on the workpiece. With suitable saw 
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.

GKS 65 GCE:

The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in 
wood while resting firmly on the workpiece. With suitable saw 
blades, thin-walled non-ferrous metals, e. g., profiles, light 
uilding materials and plastic can also be sawed.
Working ferrous metals is not permitted.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

On/Off switch

2

Lock-off button for On/Off switch

3

Thumbwheel for speed preselection  (GKS 65 GCE)

4

Auxiliary handle (insulated gripping surface)

5

Spindle lock button

6

Scale for mitre angle

7

Wing bolt for parallel guide

8

Clamping lever for bevel-angle preselection

9

Cutting mark, 0 °

10

Cutting mark, 45 °

11

Parallel guide *

12

Retracting blade guard

13

Base plate

14

Lever for retracting blade guard

15

Chip ejector

16

Blade guard

17

Handle (insulated gripping surface)

18

Hex key

19

Clamping bolt with washer

20

Clamping flange

21

Saw blade *

22

Mounting flange

23

Saw spindle

24

Fastening screw for extraction adapter *

25

Extraction adapter *

26

Clamping lever for cutting-depth preselection

27

Cutting-depth scale

28

Wing bolt for bevel-angle preselection

29

Set of screw clamps *

30

Guide rail *

31

Connection piece *

32

Vacuum hose *

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

Noise/Vibration Information

Sound emission values determined according to 
EN 60745-2-5.

Typically the A-weighted noise levels of the product are: 
Sound pressure level 92 dB(A); Sound power level 
103 dB(A). Uncertainty K = 3 dB.

Wear hearing protection!

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745-2-5:
Cutting wood: a

h

= 3.0 m/s

2

, K = 1.5 m/s

2

,

Cutting metal: a

h

= 5.0 m/s

2

, K = 1.5 m/s

2

.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different 
applications, with different accessories or insertion tools or is 
poorly maintained, the vibration emission may differ. This 
may significantly increase the exposure level over the total 
working period.
An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working 
period.
Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until 
19 April 2016: 2004/108/EC, from 20 April 2016 on: 
2014/30/EU, 2006/42/EC including their amendments and 
complies with the following standards: EN 60745-1, 
EN 60745-2-5.

Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 04.02.2015

Henk Becker
Executive Vice President
Engineering

Helmut Heinzelmann
Head of Product Certification
PT/ETM9

OBJ_BUCH-359-005.book  Page 16  Wednesday, February 4, 2015  9:52 AM