Metabo PowerMaxx BH 12 BL 16 - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws 

related to the carriage of hazardous goods (UN 

3480 and UN 3481). Inform yourself of the currently 

valid specifications when shipping li-ion battery 

packs. If necessary, consult your freight forwarder. 

Certified packaging is available from Metabo. 
Only send the battery pack if the housing is intact 

and no fluid is leaking. Remove the battery pack 

from the machine for sending. Prevent the contacts 

from short-circuiting (e.g. by protecting them with 

adhesive tape).

Reducing dust exposure:

WARNING

 - Some dust created by power 

sanding, sawing, grinding, drilling, and other 

construction activities contains chemicals known to 

cause cancer, birth defects or other reproductive 

harm. Some examples of these chemicals are:

- Lead from lead-based paints,

- Crystalline silica from bricks and cement and 

other masonry products, and

- Arsenic and chromium from chemically treated 

lumber.

Your risk from these exposures varies, depending 

on how often you do this type of work. To reduce 

your exposure to these chemicals: work in a well 

ventilated area, and work with approved safety 

equipment, such as those dust masks that are 

specially designed to filter out microscopic 

particles.
This also applies to dust from other materials such 

as some timber types (like oak or beech dust), 

metals, asbestos. Other known diseases are e.g. 

allergic reactions, respiratory diseases. Do not let 

dust enter the body.
Observe the relevant guidelines and national 

regulations for your material, staff, application and 

place of application (e.g. occupational health and 

safety regulations, disposal).
Collect the particles generated at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits,

- use an extraction unit and/or air purifiers,

- ensure good ventilation of the workplace and keep 

clean using a vacuum cleaner. Sweeping or 

blowing stirs up dust.

- Vacuum or wash the protective clothing. Do not 

blow, beat or brush.

See page 2.

1 Tool  lock 

2 SDS  chuck

3 Additional handle

4 Depth  stop

5 Metabo VibraTech (MVT)

6 Rotation selector switch

7 Trigger  switch

8 Lock

9 Switch button (for changing the operating 

mode)

10 Battery pack release button 

11 LED light to illuminate the workplace

12 Capacity indicator button 

13 Capacity and signal indicator 

14 Battery pack *

* depending on model

6.1 Assembly of the additional handle

For safety reasons, always use the additional 

handle supplied.

Open the clamping ring by turning the additional 

handle (3) anticlockwise. Push the additional 

handle onto the collar of the machine. Insert the 

depth stop (4). Securely tighten the additional 

handle at the angle required for the application.

6.2 Battery pack

Charge the battery pack (14) before use.
Recharge the battery pack if performance 

diminishes.
The ideal storage temperature is between 10°C and 

30°C.

Li-Ion battery packs “Li-Power, LiHD“

 have a 

capacity and signal indicator (13):

- Press the button (12); the LEDs indicate the 

charge level.

- The battery pack is almost flat and must be 

recharged if one LED is flashing.

6.3 Removing and inserting the battery pack
Removing:

Press the battery pack release (10) button and 

remove the battery pack (14).

Inserting:

Slide in the battery pack (14) until it engages.

7.1 Depth Stop Setting

Loosen the additional handle (3). Set depth stop  (4) 

to the desired drilling depth and retighten additional 

handle. (3)

7.2 Switching On and Off

Press the trigger switch (7) to switch on the 

machine. The speed can be changed by depressing 

the switch. 
To switch off release the trigger switch (7).

7.3 Operating mode selection

Press (8) the lock and turn the thumbwheel (9).

5. Overview

6. Initial Operation

7. Use